Product Photos

Product Photos

GeForce RTX 3080 Ti has been fitted with 12 Gigabytes of GDDR6X memory; it runs at 19 Gbps, which is a data-rate most of us can identify with when compared to the last-gen products. We'll show you the full specification details on the next pages. BTW we get often asked, but yes these photos are made with our own photos shoot and are not provided externally.

The reference RTX 3060 Ti, 3070, 3080, 3080 Ti, and 3090 cards all get HDMI 2.1 connectors and the latest iteration in DisplayPort. The reference cards also get the new 12-pin power connecter header (converter cable included that feeds from two 8-pin connectors). Mind you that I do refer to the FE editions here. AIB partner cards are free to choose and use whatever they deem applicable. Palit opts three 8-pin PEG power connectors.  

The IO panel is used as an air vent and shows four display connectors, three DisplayPort 1.4, and one HDMI 2.1 connector that will bring 8K 60 Hz HDR to a single HDMI cable. No more USB type-C VirtualLink connector, as that one is going the way of the dodo. The backplate os made out of aluminum and helps a notch with cooling, aesthetics, and protection. 

The card has three fans and uses the traditional power connector design, e.g., 8-pin, but now three. The card has a nice stylish-looking shroud underneath it that muscular cooler.  Don't get frightened about all that bling, on the next page we'll show you some photos of what's that all about. 

As stated on the front IO panel you'll see 3x DP and 1x HDMI, at the top side there also is an RGB connector available for you to use.