NZXT Kraken X72 Review

Cooling 189 Page 3 of 13 Published by

teaser

Product Showcase

Img_0347

As always the packaging is what we will deal with first, everything is packaged, cushioned and bundled safely in the box. Let's rip 'er open though.
 

Img_0348


Once unboxed you'll spot the liquid cooling unit consisting out of the radiator, fans, tubing, pump/cooling block. Most pre-fitted and ready to use of course. Basically you will need to install/mount the fans and a bracket to secure the unit. But you know what, you are visiting Guru3D.com, so we'll show you that all over the next few pages.
 

Img_0352 

You'll spot a back plate that supports a wide variety of CPU sockets. Intel LGA 115x, 1366, 2011 and AMD AM2, AM3, AM4, FM1, FM2 based processors can be used in combination with this cooler. Also good news for Ryzen Threadripper, it is SocketTR4 comaptible.

 Included are:

  • Liquid CPU Cooler
  • Multi-platform mounting kit for all modern CPU sockets
  • Three High Performance Fans
  • USB / FAN / Power Cable 
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Quick Start Guide

So summed up, once unboxed you'll spot the cooling unit consisting of the radiator assembly, fan and brackets + back plate that support a very wide range of AMD and Intel processors. A little thermal paste is pre-applied on the cooler for you.
 

Img_0354

 

Here we have the unit and pump with LED lighting unit, we'll need to mount the three variable PWM fans (120mm). Both fans are re-wired on one connector and are controlled from a RPM/PWM controller that resides in the cooling block. With NZXT CAM software you can regulate it and setup your pump and fan RPM and LED preferences. We'll show that later on in the article, in a chapter about the software.

Share this content
Twitter Facebook Reddit WhatsApp Email Print