NZXT Kraken X63 Review -
Processor baseline performance test
Testing the cooler
Time to test. Today's tested cooler will work absolutely great with any processor from low to high-end at default operating frequencies, of course, there's room left for overclocking as well. We have built a new test system policy for cooling benchmarks. Let's have a look at the results for the system in its default non-overclocked state. Below, the IDLE temperatures, thus your processor is doing barely anything to nothing. Just sitting and waiting in your system.
If you have a look at the chart above you can see the processor LOAD temperatures (in the non-overclocked state). We measure in a 21 Degrees C ambient room temperature. Ambient temperatures do affect the cooling performance, albeit a little bit. We note down the hottest measured CPU package temperature.
Guru3D's rule of thumb on CPU load vs cooling temps:
- Anything up-to to roughly 50 Degrees C or lower we consider enthusiast-class cooling
- Anything in-between 51 to 60 Degrees C we consider performance cooling
- Anything in-between 61 to 70 Degrees C we consider mainstream cooling
- Anything above 71 Degrees C we consider average cooling
This LCS kit thus sits at the threshold of performance cooling at processor default clock frequencies.
NZXT updated its Kraken series to revision 3 in an RGB flavor now as well, in this review we test the X63 version Liquid cooler. An AIO LCS liquid CPU cooler for cases with 280 mm radiator mounts. Thi...
NZXT Kraken X63 Review
NZXT updated its Kraken series to revision 3, in this review we test the new X63 Series Liquid cooler. An AIO LCS liquid CPU cooler for cases with 280 mm radiator mounts. This updated revision CPU coo...
NZXT Kraken M22 Review
NZXT has released a budget-friendly 120mm rad based Kraken series liquid cooler, meet the M22. This new cooler is compatible with CAM software for that funky LED display and the radiator is armed with...
NZXT Kraken X72 Review
NZXT just super-sized their Kraken series liquid coolers, meet the x72 for cases with 280 mm radiator mounts. This new cooler is compatible with CAM software. This allows you to program, customize an...