Product Installation

 
We are testing the cooler externally but you get the idea here. As mentioned there is a quite a bit of wiring to manage, so I wanted to show you that a little better on this page. 

To the top basically you can spot the USB CAM LINK cable, that needs to lead towards an internal USB connector of your motherboard. This controls the RGB LED unit.

Your FAN and PUMP cables also lead towards the motherboard, please use the CPU FAN connector for the fan, and the OPT (optional) fan or if available dedicated PUMP connector for the pump.
 

So there is some wiring going on alright, maybe too much, going on cables wise. We'll leave that to you to judge though. We really like the new sleeved wide diameter tubing BTW. And yes, we just powered her up.
 

Once powered on you'll notice that the NZXT logo lights up with a LED and a mirror effect. Well, in fact, that is configurable as it's an RGB LED solution. Both the mirror 'rings' that you can see as well as the NZXT logo can be configured independently from each other. Thus you can turn off that NZXT logo if you wanted to do that.
 

Many RGB options are available to you. Based on the temperature the coloring can change, you may also simply select a dedicated color of preference to your liking with the CAM software as well as a combination of colors versus several animations. Have a look at the video that we recorded, it'll get the message across.