MSI Z270 GAMING Pro Carbon review

Mainboards 328 Page 6 of 25 Published by

teaser

Product Showcase

 

 

Img_5565 


The Z270 motherboard will get you six Intel chipset based SATA 6 Gb/s storage ports. Combined in here are two M.2 PCI Express slots using x4 PCIe lanes, giving these (Optane compatible) ports not 10 GB/sec but 32 GB/sec of performance. There are plenty of USB 3.0 and 3.1 ports available through internal motherboard connectors, some Intel based, some Asmedia ASM2142 powered. BTW the industry calls USB 3.0 / USB 3.1 Gen 1 these days, a little misleading TBH. USB 3.1 Gen 2 would be the new and proper 10 Gbps connectors. This motherboard has all gen 2 connectors and thus you get full speed.
 

 Img_5570

Here we can see the four DIMM slots which offer support for dual-channel DDR4 memory up to even 3800 MHz (OC). If you activate the XMP 2.0 profile in the BIOS, your memory will be automatically configured for you at its maximum clock speed and recommended voltage. You can install a maximum of 64 GB in total. Again, XMP 2.0 must be supported, we'll show you this setup running at 2133 and extremely high XMP frequency measurements later on in the article.

 

Img_5567

 

Yep, you may unleash some more power with graphics configurations. Support for up to 3 full length discrete VGA cards. Mind you, we can only recommend you to go with 2x multi-GPU. Three cards would bog down the 3rd card at a x4 link where two cards would both get x8 Gen 3.0 PCIe links. To the far left you can see 'Audio Boost', underneath is a Realtek ALC 1220 codec housed for your audio. To the right you can see the M.2 shield.
 

Img_5574

So the M.2 shield is handy. It is nothing more than a simple metal cover with pre-applied thermally-conductive gap-filling pad. Designed to be compatible with any length of M.2 SSD, the Shield is hinged at the bottom and clamps down over the top of the device in order to give the chips a larger surface area to bleed off excess heat. 
  

Img_5575


Obviously the unit has no heatsink, so you will need airflow to cool the M.2 additionally. MSI includes just one shield, whereas there are two physical M.2 slots. Btw another thing I like about it, some cheaper OEM version M.2 devices have a green PCB, you can cover that up really nicely with these shields.

Share this content
Twitter Facebook Reddit WhatsApp Email Print