MSI X399 Gaming Pro Carbon AC review

Mainboards 327 Page 4 of 31 Published by

teaser

Product Showcase

   

Img_7906

 
When we place the motherboard at an angle we see that all new socket SP3 / TR4. It will support all Threadripper processors and is actually based on the SP3 Epyc socket, this is referred to as the server class up-to 32 core processors. The cooler mounting system is the same for both. This boaard has 4 x PCIe 3.0 x16 slots -  2 x PCIe 2.0 x1 slots

 

Img_7910

 
Storage ports then -- the board is fitted with 8x SATA3 ports. There is no U2 connector, real-estate that nobody is going be using either really. 
 

Img_7916

 
The board holds 3x M2 connectors. Just plug them in and secure them with a screw. The inside of the shields have thermal padding, remove the plastic, secure it and this will function as a bit of cooling as well.
 

Img_7908

 
As stated, there are three locations for M2 SSDs, all in-between the PCIe slots. I like that very much. The entire board has RGB LED lighting as we'll show you in some photos. All configurable with software of course.

 

Img_7911

 
The memory DIMM slots, the board supports single, dual and quad channel with support for up-to DDR4 3600+ and starts at 2133 MHz memory modules. 8 x DDR4 DIMM sockets can support up-to 128 GB of system memory with Threadripper processors. We recommend 3200 MHz low latency memory (CL14). MSI also is listing the DIMM slots as ECC UDIMM memory compatible.

Img_7907


Share this content
Twitter Facebook Reddit WhatsApp Email Print