MSI GeForce RTX 2070 SUPER Gaming Z TRIO review - Test Environment & Equipment

Test Environment & Equipment

Here is where we begin the benchmark portion of this article, but first let me show you our test system plus the software we used. Please note that we are propagating new benchmarks to the Z390/9900K system while old benchmarks get slowly phased out for the Haswell system. So new game titles tested are based on the Core i9 9900K system, the old game titles continue to be tested on the older platform.

Mainboard

MSI X99A XPower - Review
ASRock Z390 Taichi Ultimate - Review

Processor

Core i7 5960X (Haswell-E) 8c/16t @ 4.2 GHz - Review
Core i9 9900K (8c/16t) @ defaults - Review

Graphics Cards

• GeForce RTX 2070 Super 8GB GDDR6 (MSI Gaming Z TRIO)

Memory

16 GB (4x 4MB) 2400 MHz DDR4 (Haswell platform)
32 GB (4x 8MB) 3200 MHz DDR4 (Cofee lake platform)

Power Supply Unit

1,200 Watts Platinum Certified Corsair AX1200i - Review

Monitor

ASUS PQ321 native 4K UHD Monitor at 3840 x 2160 - Review

OS related software

Windows 10 64-bit
DirectX 9/10/11/12 End-User Runtime (Download)
AMD Radeon Software Driver 19.10.x (Download)
NVIDIA GeForce Driver / 440.97 (Download)

A Word About "FPS"

What are we looking for in gaming, performance wise? First off, obviously Guru3D tends to think that all games should be played at the best image quality (IQ) possible. There's a dilemma though, IQ often interferes with the performance of a graphics card. We measure this in FPS, the number of frames a graphics card can render per second, the higher it is the more fluently your game will display itself.

A game's frames per second (FPS) is a measured average of a series of tests. That test is often a time demo, a recorded part of the game which is a 1:1 representation of the actual game and its gameplay experience. After forcing the same image quality settings; this time-demo is then used for all graphics cards so that the actual measuring is as objective as can be.

• So if a graphics card barely manages less than 30 FPS, then the game is not very playable, we want to avoid that at all cost.
• With 30 FPS up-to roughly 40 FPS you'll be very able to play the game with perhaps a tiny stutter at certain graphically intensive parts. Overall a very enjoyable experience. Match the best possible resolution to this result and you'll have the best possible rendering quality versus resolution, hey you want both of them to be as high as possible.
• When a graphics card is doing 60 FPS on average or higher then you can rest assured that the game will likely play extremely smoothly at every point in the game, turn on every possible in-game IQ setting.
• Over 100 FPS? You either have a MONSTER graphics card or a very old game.

Monitor Setup

Before playing games, setting up your monitor's contrast & brightness levels is a very important thing to do. I realized recently that a lot of you guys have set up your monitor improperly. How do we know this? Because we receive a couple of emails every now and then telling us that a reader can't distinguish between the benchmark charts (colors) in our reviews. We realized, if that happens, your monitor is not properly set up.

What Are You Looking For?

• Top bar - This simple test pattern is evenly spaced from 0 to 255 brightness levels, with no profile embedded. If your monitor is correctly set up, you should be able to distinguish each step, and each step should be visually distinct from its neighbors by the same amount. Also, the dark-end step differences should be about the same as the light-end step differences. Finally, the first step should be completely black.
• The three lower blocks - The far left box is a black box within the middle a little box a tint lighter than black. The middle box is a lined square with a central grey square. The far right white box has a smaller "grey" box that should barely be visible.

You should be able to distinguish all small differences, only then your monitor is set up properly contrast and saturation wise.