MSI GeForce GTX 1070 Quick Silver 8G OC review

Graphics cards 1048 Page 10 of 31 Published by

teaser

Graphics Card Noise Levels

Graphics Card Noise Levels

When graphics cards produce a lot of heat, usually that heat needs to be transported away from the hot core as fast as possible. Often you'll see massive active fan solutions that can indeed get rid of the heat, yet all the fans these days make the PC, a noisy son of a gun. Do remember that the test we do is extremely subjective. We bought a certified dBA meter and will start measuring how many dBA originate from the PC. Why is this subjective you ask? Well, there is always noise in the background, from the streets, from the HDD, PSU fan, etc, so this is by a mile or two, an imprecise measurement. You could only achieve objective measurement in a sound test chamber.

The human hearing system has different sensitivities at different frequencies. This means that the perception of noise is not at all equal at every frequency. Noise with significant measured levels (in dB) at high or low frequencies will not be as annoying as it would be when its energy is concentrated in the middle frequencies. In other words, the measured noise levels in dB will not reflect the actual human perception of the loudness of the noise. That's why we measure the dBA level. A specific circuit is added to the sound level meter to correct its reading in regard to this concept. This reading is the noise level in dBA. The letter A is added to indicate the correction that was made in the measurement. Frequencies below 1 kHz and above 6 kHz are attenuated, whereas frequencies between 1 kHz and 6 kHz are amplified by the A weighting.

Examples of Sounds Levels

Jet takeoff (200 feet) 120 dBA  
Construction Site 110 dBA  Intolerable
Shout (5 feet) 100 dBA  
Heavy truck (50 feet)  90 dBA  Very noisy
Urban street  80 dBA  
Automobile interior  70 dBA  Noisy
Normal conversation (3 feet)  60 dBA  
Office, classroom  50 dBA  Moderate
Living room  40 dBA  
Bedroom at night  30 dBA  Quiet
Broadcast studio  20 dBA  
Rustling leaves  10 dBA  Barely audible

There are a lot of differences in measurements amongst websites. Some even place the dBA meter 10 cm away from the card. Considering that's not where your ear is located, we do it our way, at 75 cm distance.

** Small note - recent improvements to our test environment now allow us to measure with starting ambient threshold of 29~30 dBA.

Untitled-4

 

For each dBA test we close the PC/chassis and move the dBA gun 75 cm away from the PC. Roughly the same proximity you'll have from a PC in a real-world situation. Above, the IDLE (desktop mode) results where the GPU hardly has to do anything. The system idle results are really good.

Untitled-5

Once the card is in a fully stressed status (in-game) it reaches roughly 33~34 dBA.This is incredibly silent. The card remains passive under 60 degrees C, and as such then the fans do not even spin, so in that stage it is inaudible for your ears. We do hear a tiny bit of coil whine, it is very limited though and i doubt you could hear the card inside a closed chassis.

Share this content
Twitter Facebook Reddit WhatsApp Email Print