MSI Creator TRX40 review

Mainboards 328 Page 4 of 26 Published by

teaser

Product Showcase

Product Showcase

When we place the motherboard at an angle we see the AMD Socket sTRX4. It will support only Ryzen Threadripper 3000 series (and newer), processors. The board has a 2x 8-pin power headers available for the processor. The board has an advanced and improved power design, a good 16 phases for the CPU Vcore. Storage ports then -- the board is equipped with six SATA3 ports, alongside three M2 slots that have been tucked away under the heatsinks. You can add another four NVMe PCIe Gen3/Gen4 x4 M.2 units with the add-in card (included) for some extreme storage solutions. The memory DIMM slots have been reinforced with metal shielding. As stated on the previous page it supports single, dual and quad-channel with support up-to DDR4 4666 (O.C.) and starts at 2133 MHz memory modules. 8 x DDR4 DIMM sockets can sport up to 256 GB of system memory. There are some normal-sized and micro buttons available to be able to power on and reset directly from the motherboard. You'll also spot embedded, and included a LED strip header. The chipset is cooled with an active fan, however, this fan could not be heard during our testing also it van be configured from the BIOS at a setting of preference.

  

56544_img_9588

Img_9589

Img_9590

Img_9591

Img_9595

Img_9596

Img_9597

Img_9598

Share this content
Twitter Facebook Reddit WhatsApp Email Print