Kioxia Exceria PLUS 2TB M.2 NVMe SSD review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 367 Page 2 of 19 Published by

teaser

Specifications & Features

Specifications & Features

Kioxia is offering three versions of the Exceria PLUS (500GB, 1TB and 2TB). For endurance, a 1TB model has been rated at 400 TBW, half that for 500 GB and double that for the 2TB model. So if you write 25 GB each day for a year that's 9.125 TB per year. On that pace a 2TB SSD could last you 88 Years. The series will be fitted with TLC written 3D NAND flash memory (vertically stacked 96-layers). This allows the company to offer the proper storage volumes. So instead of using Planar NAND, 3D NAND is used. 3D TLC NAND is a physical vertical NAND cell stacking not to be confused with chip stacking in a multi-chip package. In 3D NAND, NAND layers, not chips, are stacked in a single IC. The good news is continued cost reduction, smaller die sizes and more capacity per NAND chip. Also, installed NAND toolsets in the wafer fabs can, for the most part, be reused, thereby extending the useful life of fab equipment.  This model is offered with a proper 5-year warranty (or number of TBW reached). Unfortunately, there is no information available on the controller. Photos indicate an inhouse-design. 

As explained on the previous page, there are three series from Kioxia, a quick upgrade version in the SATA3 SSD range, the mainstream Exceria, and then an enthusiast version in the form of an Exceria Plus series, below a quick overview of what SKUs will become available at the corresponding specifications like available volume sizes.


Untitled-1

Share this content
Twitter Facebook Reddit WhatsApp Email Print