Guru3D Rig of the Month - March 2013 - Page 2

by Hilbert Hagedoorn on: 03/29/2013 10:57 AM [

] 19 comment(s)

4. How much money did you spend on the rig as it is right now?

So far I had spent close to 8 - 10k USD for the whole setup (Including the CPU/WC/Audio/LCD).

5. How often do you update/buy a new rig?

I update my rig pretty often. Especially GPUs as I am always after lag free/high FPS gaming experience.

6. What components are used?

I am using the following components. List is pretty long for my WC components as the parts are not readily available in my country, so I had ordered a lot more than what I required

Rig PC Component::
- Intell i7 3930K
- ASUS Rampage 4 Extreme BF3 Edition
- Corsair Vengence DDR3 1600 Rams (32GB Total) 8 X 4GB
- MSI 680 GTX 2GB Twin Forzr OC Edition X 2 (SLI Mode)
- SONY DVDRW
- Seagate Green 2TB HDD (Media Storage)
- Western Digital Black 1TB HDD (Application Storage)
- ADATA SX900 128GB SSD (My OS Drive)
- Samsung 810 SSD 128GB (Games Drive)
- Seasonic X1250 Gold PSU
- Lamptron Touch (Controls all of my LED Lighting and Water Temperature Sensor)
- Lamptron FC5V2 (Controls all of rig's fans)
- Corsair Obsidian 800D (Custom painted Pearl White)
- Cables are all sleeved with MDPC Sleevings (Red/White/Black)
- Demciflex Filters for all fan intakes

Rig WC Components:
- EK Supreme HF Nickel EN
- Koolance RIVE Mobo WB
- Koolance VID680 X 2
- Bitspower Universal Galaxy Ram Blocks (Clear Plexi) 4DIMM X 2
- EVGA 680GTX Backplate X 2
- EK X2 Multioption 250 Advance
- Koolance 450X2 V1.2 Bay Reservoir (Removed due to leaks)
- Swiftech MCP 655 (Speed Control) X 2EK
- EK XTX360
- EK XT240
- Bitspower MCP655 V2 top X 2
- Bitspower MCP655 mod kit X 2
- Gentle Typhoons 1850 RPM X 7
- NZXT 140mm X 1
- XSPC 3/8ID 5/8OD UV Orange/Red Tubing
- Distilled Water
- Mayhem Red Dye
- Dead Water Biocide

Fittings: Bitspower Shiny Silver ID 3/8 OD5/8, Feser, XSPC, EK, Koolance, Phoyba:

42 X Bitspower Silver Shiny 3/8ID 5/8OD Compression Fittings
16 X 45 Degrees Rotary (Bitspower)
17 X 90 Degrees Rotary (10 EK, 7 Bitspower)
3 X 45 Degrees Extender (Bitspower)
1 X 60 Degrees Extender (Bitspower)
18 X Extender (6 X Bitspower, 12 X EK)
2 X 20mm Extender (Bitspower)
2 X 20mm Extender (Phobya)`
2 X 30mm Extender (Enzotech)
2 X 50mm Extender (Phoyba)
4 X Phoyba G14 Male to Male Rotary
4 X Bitspower D-Plug (1 Inch)
2 X Bitspower MINI D-Plug
6 X Bitspower Multi Transfer Adapter
2 X Koolance Multi Transfer Adapter
2 X Bitspower Dual Rotary 90D
1 X Bitspower L Fitting Rotary
2 X Bitspower T Fitting Rotary
1 X Bitspower T Fitting
6 X Male to Male fittings (Feser)
15 X Stop Plug (2 Bitspower, 13 Feser)
1 X Sealing Plug (Bitspower)
1 X Flow Indicator (Bitspower)
1 X Crystal LED Stop Plug (Bitspower)
2 X Case Panel Fittings (Feser)
1 X Temperature Sensor Plug (Bitspower)
5 X XSPC Barb
2 X Feser Barb
3 X Koolance Quick Disconnect (Female 3/8 ID Male 5/8 OD)
3 X Koolance Quick Disconnect (Male 3/8 ID Male 5/8 OD)
2 X Koolance Quick Disconnect (Male G1/4 Threaded)
4 X Koolance Dual VID Fittings
1 X Koolance RP450X2 Serial Pump Fitting
1 X Koolance Pressure Valve
2 X Phobya Pressure Valve

(Above fittings are my inventory in total. In total in my rig I had use around 100 - 110 of them.)

4 pages 1 2 3 4

Guru3D Rig of the Month - July 2013
The Guru3D Rig of the Month July 2013 might not appeal to everybody but dude, does it scream man cave from a to Z. This is room conversion is themed all the way. The rig has been made by Leonardo Akira.

Guru3D Rig of the Month - June 2013
The Guru3D Rig of the Month June 2013 is that kind of build that everybody can relate to, yet nobody understands. This is SteamPunk themed all the way. The rig has been made by Luciel Campbell who is an IT consultant at the age of 26 years. His work of craftsmanship is called APASF aka A Post-Apocalyptic Steampunk Future. Have a look.

Guru3D Rig of the Month - May 2013
The Guru3D Rig of the Month May 2013 is that kind of build that everybody can make while not investing too much money. The outcome however is something that seems a little extraordinary and something just very beautiful . Meet Alec, he's 18 and a Student from Surrey. His Rig has a name, Project Perspective.

Guru3D Rig of the Month - April 2013
The Guru3D Rig of the Month April 2013 is something that will shock and awe you. Perhaps you can remember Alain-S, he actually submitted a rig back in the summer of 2011, an all white chassis. Two years later he has finished another build, and it is just spectacular, he even has a little nickname for it Grafit!