Gigabyte X299 Aorus Gaming 3 motherboard preview

Mainboards 328 Page 4 of 5 Published by

teaser

Product Showcase

   

Img_7354

 When we place the motherboard in an angle we see the socket LGA2066. It will support both Kaby and Skylake-X procs, this is referred to as the Core X series processors. The board has an 8-pin power header for the processor.

Img_7345

 
Storage ports then -- Gigabyte is equipping the board with eight SATA3 ports. There's no fuzz with weird U2 or SATA Express connectors. See the 4-pin connector left from the SATA ports? That's the Intel VROC Upgrade Key header.
 

Img_7353

 
Here we see that a bit better. Just a proper eight SATA3 6Gbps ports, alongside two M2 slots that have been tucked away close to upper PCI-Express slot : 
 

Img_7350

 
There are two M2 SSD slots available, one 8cm type type 2242/2260/2280 and another 10cm type 2260/2280/22110 sslot. Both support  PCIe x4/x2 Gen 3.0. With two NVMe PCIe Gen3 x4 M.2 connectors onboard, AORUS brings to the user PCI-Express connectivity for SSD devices. Delivering up to 32 Gb/s data transfer speed per connector, the dual M.2 supports RAID modes.
 

Img_7355

 
The memory DIMM slots have been reinforced with metal shielding as well. As stted on the previous page it supports single, dual and quad channel with support up-to DDR4 4333 (O.C.) and starts at 2133 MHz memory modules. 8 x DDR4 DIMM sockets can sport up-to 128 GB of system memory and support for up to 512 GB of system memory when using Registered DIMMs.
 

Img_7352

Share this content
Twitter Facebook Reddit WhatsApp Email Print