G.Skill Flare DDR3 2000 MHZ C7 AMD kit review - Product Gallery

by Hilbert Hagedoorn on: 08/08/2010 02:00 PM [ ] 0 comment(s)

Product Gallery

G.Skill Flare memory kit

Packaging ... hey we show you everything my man, we always start off with packaging so you know what to look for in the stores -- it's as simple as that really. And yes .. that might now be the final packaging. Hey we just care what's on the inside right. As you can see this kit comes with G.Skills a memory fan and installation guide.

Here we have the DIMMs after unpacking. This is the 4GB 2000 MHz kit = PC3 16000 with 2x 2GB DIMMs. Overall a nice design, wish that the PCB would have been black though. The heat spreaders are made out of aluminum for optimal heat conductivity. This kit can manage latencies of 7-9-7-24 at 1.65 Volts, and that is pretty impressive stuff alright! Labels is a Command rate 2T but we noticed they also run at a command rate of 1T at that frequency.

G.Skill Flare memory kit

Very simple stuff, but the details of the modules can be read from a small sticker. You can spot the SKU code and generic info on there. Also primary info like latencies are displayed. It's good to see voltages being reported on there as well. A lot of memory producers lack this info, yet it is so important. Missing on the sticker is the command rate though.

14 pages « 2 3 4 5 next »

G.Skill TridentZ5 6400 CL32 DDR5 scaling review
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6400 CL32 (!) DDR5 kit and fire off freq...

G.Skill TridentZ 5 DDR5 5600 CL36 review
G.Skill has prepared very well for launching a new memory standard and has presented three DDR5 series: the Trident Z5 (5600-6400 MHz), the Trident Z5 RGB (the same range as the non-RGB’s), and the Ripjaws S5 (5200-5600 MHz). They all come in 32 GB kits (2 x 16 GB), and their frequency is higher than the base 4800 MHz. Today, we are checking the G.Skill TridentZ5 5600 MHz CL36 DDR5 kit. It’s not the high-end of the series, as even the 6400 MHz CL32 are available, and the 5600 MHz is the lowest frequency you can get from this DDR5 family.

DDR5 scaling with G.Skill TridentZ5 6000 CL36 review
Recently we looked at the performance differential between DDR4 and DDR5 on Alder-Lake, Intels Gen 12th series processors. Today we review a G.Skill TridentZ5 6000 CL36 DDR5 kit and fire off frequenc...

G.Skill Z5i (Mini ITX) chassis review
This time, we're checking out the G.Skill Z5i, the first chassis from a company known the most from the RAM. Some can remember that there's an AIO (Enki) available, as well as the keyboards (like KM360), mice (and mousepad), headsets, or PSUs. The attempt is made in a not-so-popular segment, meaning the Mini-ITX (so that's one of the reasons for the mentioned limit). This choice is a brave one as it's not so easy to create a good product here. Yes, it's gaining the share, but the ATX is dominating (maybe we'll also see something from G.Skill?).