Product Showcase - The finished build
Product Showcase - The finished build
On this page, you’ll find a selection of photos of the finished build inside the Fractal Design VECTOR RS. The GPU that we used here has an AIO LCS, and the CPU is cooled (for measurements) either with air (Thermalright True Spirit 120 Direct) or with a liquid cooler placed at the front of the case.
For the purpose of this photo section, the Asus Ryujin 360 was used (radiator placed at the front). The motherboard is an ATX form factor one (and it looks relatively small in this Fractal chassis), based on the Z390 chipset, with a de-lidded i7 8700K @ 4.8 GHz inside. The GPU comes from Aorus, and it’s the Waterforce version (GeForce GTX 1080 Ti). The final result looks very nice. There were no major issues with installing the components inside. The PSU is mounted using a removable bracket. Overall, fitting all the cables of the test setup in the case wasn’t difficult, and the EPS power cable didn’t have to be pre-routed before we attached the motherboard to the tray. When using the Storage Layout it’s also easier to hide the cables.
