Enermax Modu82+ II 625W PSU review

PSU - Power Supply Units 108 Page 4 of 8 Published by

teaser

 

Enermax Modu 82+ II 625W PSU

At the front side we spot a nice honeycomb air vent; it allows for optimal airflow running through the PSU, cooling down its components and keeping them nicely efficient. Also, obviously we spot the power connector and on/off switch.  The metal cord guard can be inserted here, preventing that the power cable is yanked out by accident.

Enermax Modu 82+ II 625W PSU

There is one top fan, really a very quiet 13.9cm sized fan. It comes with RPM control and thus guarantees cool performance and silent operation. There's a pretty nice and optimal airflow throughout the PSU. The PSU has an ATX design yet is slightly more lengthy, it'll fit in any chassis though, its dimensions are: 140mm x 86mm x 150mm (W x H x D).

 

Enermax Modu 82+ II 625W PSU

When it comes to wiring, we get a smile on our face, have a look at the supplied connectors:

Native connectors:

  • 24-pin EATX (55cm)
  • EPS 8-pin (60cm)
  • EPS 4-pin (4p) (60cm)

Modular connectors:

  • 2 x 6+2 PEG (50cm)
  • 2 x 4-pin Molex, 1x floppy (55cm)
  • 3 x SATA (75cm)
  • 1x SATA/Molex

Peripheral connectors like the Molex again start at 50 CM / 20" and end at roughly 75 CM.

Enermax Modu 82+ II 625W PSU

The 24-pin EATX measures in at 55cm. We see sleeved cabling with red colored connectors. That's a good design. The cables have a proper nice length, though I would like to see the cables sleeved in black and the connectors colored black as well. But that is purely for aesthetic reasons of course.

Share this content
Twitter Facebook Reddit WhatsApp Email Print