Product Showcase - Exterior

Dazzling to watch eh? The QuadSteller has a bit of an intrusive stealthy feel, everything is completely different opposed to what you are used to, this very much goes against your gut feeling of a traditional build. Each of the four compartments has its own panel, at the backside, it is secured with two thumbscrews which you need to remove. You can now slide the panel cover in a backward direction.

To be able to remove all four covers, you'll need to rotate the chassis (upside down etc), so please do work on a cloth or something so that you will not damage the chassis. Above you can see the power supply compartment. Is that big enough for ya?

The other bottom panel on the opposing side has an extra air-vent, the two lower panels have rubber mounts, here the chassis will rest on. 
 

Once you removed the four panels, you'll feel you're looking at something that might look like Chinese finger trap or maybe labyrinth design-wise, it's a myriad of compartments and everything simply is different. While that might look confusing, the inside and setup of it all have been designed in a logical an common manner. You'll spot a motherboard tray, grommet rubberized holes, cable routing options, it's all there, much like you are used too compared to a regular chassis, it's all just ... warped.