Fractal Design Pop Air RGB Black TG review
Palit GeForce GTX 1630 4GB Dual review
FSP Dagger Pro (850W PSU) review
Razer Leviathan V2 gaming soundbar review
Guru3D NVMe Thermal Test - the heatsink vs. performance
EnGenius ECW220S 2x2 Cloud Access Point review
Alphacool Eisbaer Aurora HPE 360 LCS cooler review
Noctua NH-D12L CPU Cooler Review
Silicon Power XPOWER XS70 1TB NVMe SSD Review
Hyte Y60 chassis review
DeepCool Maelstrom 240 review -
Product Showcase
by on: 11/04/2014 09:52 AM [
] 3 comment(s)
] 3 comment(s)
Product Gallery
As always we start with the packaging -- well, everything is packaged, cushioned and bundled safely in the box. Let's rip that packaging open.
Once opened up you'll spot the liquid cooling unit consisting of the radiator, fan, tubing, pump/cooling block. Mostly pre-fitted and ready to use of course. Everything is carefully packaged and individually wrapped in plastic.
You'll spot a backplate that supports a wide variety of CPU sockets; Intel LGA 2011 / 1366 / 1156 / 1155 / 1150 / 775 and AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 based processors can be used in combination with this cooler. That's extensive socket support alright.
Included are:
- Liquid CPU Cooler
- Mounting kit for all modern CPU sockets
- Two High Performance Fans
- Fan and radiator mounting screws
- Thermal compound prepped to copper base
- Quick Start Guide
- PWM Fan HUB
So summed up, once unboxed you'll spot the cooling unit consisting of the radiator assembly, fans and brackets + backplate that supports a very wide range of AMD and Intel processors. We do have some work cut out for us as we need to mount the fans and cooling block retention clips.
Here we have the Maelstrom base unit, we'll need to mount the two variable PWM fans (each 120mm), with the pump and radiator assembled in one single unit. Both fans are pre-wired on one connector and are controlled from a RPM/PWM controller on your motherboard.
Deepcool AS500 PLUS CPU Cooler Review
We review the Deepcool AS500 PLUS. This dual fan-based CPU cooler absolutely impresses in looks, features as well as performance. It's easily tagged as a high-end performing air-cooler with low nois...
Deepcool AK400 air cooler review
Today, we are reviewing an air cooler from Deepcool; it’s an AK400. The AK400 is from the same family as the AK620 (a dual-tower cooler). The previous product of this type (air cooler) covered was the AS500, tested back at the end of 2020. It was so good (it earned the “Approved” award) that it stayed as a part of the chassis test suite. This time around, it’s also a single tower design cooler, with a four heat pipe tower layout, a unique matrix fin design, and a high-performance FDB fan that should provide excellent heat dissipation and low noise levels.
Deepcool CK560 chassis review
This time, we’re checking out the Deepcool CK560, an airflow-oriented mid-sized ATX tower PC chassis. I had an almost instant deja-vu when I saw the first materials about it. Why’s that? It looks almost exactly the same as the other Deepcool (previously also named GamerStorm) product, I mean the CG560, which I had in my hands for a review. Well, the front panel looks a bit different, but that’s not a significant change. Let’s check the other things as well.
Deepcool PQ1000M (1000W PSU) review
Today we’re putting the new Deepcool PQ1000M power supply on our test bench. The company is rather known for making the chassis, coolers, or fans, but two power supplies were already covered on guru3d. The first one was the DQ750-M back in 2018, a 750 Watt unit with an 80 Plus Gold certificate that earned the “Recommended” award. The second one was the DQ850-M-V2L which was reviewed in 2020, bringing, for example, the 10-year warranty (instead of 5-years), but on the other side – it was rather noisy in low-mid load. Another two years have passed (coincidence?), and the next unit from Deepcool is in our hands, again with more wattage (it looks like a rule).
We review the Deepcool AS500 PLUS. This dual fan-based CPU cooler absolutely impresses in looks, features as well as performance. It's easily tagged as a high-end performing air-cooler with low nois...
Deepcool AK400 air cooler review
Today, we are reviewing an air cooler from Deepcool; it’s an AK400. The AK400 is from the same family as the AK620 (a dual-tower cooler). The previous product of this type (air cooler) covered was the AS500, tested back at the end of 2020. It was so good (it earned the “Approved” award) that it stayed as a part of the chassis test suite. This time around, it’s also a single tower design cooler, with a four heat pipe tower layout, a unique matrix fin design, and a high-performance FDB fan that should provide excellent heat dissipation and low noise levels.
Deepcool CK560 chassis review
This time, we’re checking out the Deepcool CK560, an airflow-oriented mid-sized ATX tower PC chassis. I had an almost instant deja-vu when I saw the first materials about it. Why’s that? It looks almost exactly the same as the other Deepcool (previously also named GamerStorm) product, I mean the CG560, which I had in my hands for a review. Well, the front panel looks a bit different, but that’s not a significant change. Let’s check the other things as well.
Deepcool PQ1000M (1000W PSU) review
Today we’re putting the new Deepcool PQ1000M power supply on our test bench. The company is rather known for making the chassis, coolers, or fans, but two power supplies were already covered on guru3d. The first one was the DQ750-M back in 2018, a 750 Watt unit with an 80 Plus Gold certificate that earned the “Recommended” award. The second one was the DQ850-M-V2L which was reviewed in 2020, bringing, for example, the 10-year warranty (instead of 5-years), but on the other side – it was rather noisy in low-mid load. Another two years have passed (coincidence?), and the next unit from Deepcool is in our hands, again with more wattage (it looks like a rule).
© 2022
