Deepcool AS500 PLUS CPU Cooler Review -
Product Showcase CPU Cooler
Product Showcase CPU Cooler
For installation, please refer to the installation handbook that came with your AS500/PLUS. The Deepcool AS500/AS500 Plus requires a custom mounting kit for both AMD and Intel. The AMD installation makes use of the existing backplate, whereas the cooler comes with its own backplate for Intel LGA 115x systems. Mounting screws are supplied with LGA2011 systems. As previously stated, Threadripper sockets sTR4 and TR do not have out-of-the-box support.
The configuration of the heat sink's front and back or back sides is not similar. The heat sink is made up of 56 white-coated metal fins. This is not a complicated design. In comparison to the sides, the primary central area features an inset pattern. The heat sink is 159mm in width. Any two fins have a 1.6mm space between them.
The cooler is preassembled with the fans. Mounting brackets for contemporary Intel and AMD systems are included. Actual CPU holes may be found in the installation guide. This cooler does not include a TR4/sTR4 mounting bracket.
In comparison to the front side, the reverse has a more stepped appearance. The central section has the most inset arrangement, which makes sense given that the digital RGB wire is run through it. The final four fins feature a cutout through which the cable is routed to the bottom. The cutaway design functions as a catcher, preventing the cable from falling down. I admire the attention to detail in this case.
The cooler comes with a specialized controller from Deepcool. For the wire coming from the heatsink, the controller employs a proprietary 3-pin connection. The controller is powered via SATA. The controller has a straightforward function. We've got three buttons. The + and – buttons control the pace of the dynamic lighting effects, while the middle button changes the lighting style.
We review the Deepcool AS500 PLUS. This dual fan-based CPU cooler absolutely impresses in looks, features as well as performance. It's easily tagged as a high-end performing air-cooler with low nois...
Deepcool AK400 air cooler review
Today, we are reviewing an air cooler from Deepcool; it’s an AK400. The AK400 is from the same family as the AK620 (a dual-tower cooler). The previous product of this type (air cooler) covered was the AS500, tested back at the end of 2020. It was so good (it earned the “Approved” award) that it stayed as a part of the chassis test suite. This time around, it’s also a single tower design cooler, with a four heat pipe tower layout, a unique matrix fin design, and a high-performance FDB fan that should provide excellent heat dissipation and low noise levels.
Deepcool CK560 chassis review
This time, we’re checking out the Deepcool CK560, an airflow-oriented mid-sized ATX tower PC chassis. I had an almost instant deja-vu when I saw the first materials about it. Why’s that? It looks almost exactly the same as the other Deepcool (previously also named GamerStorm) product, I mean the CG560, which I had in my hands for a review. Well, the front panel looks a bit different, but that’s not a significant change. Let’s check the other things as well.
Deepcool PQ1000M (1000W PSU) review
Today we’re putting the new Deepcool PQ1000M power supply on our test bench. The company is rather known for making the chassis, coolers, or fans, but two power supplies were already covered on guru3d. The first one was the DQ750-M back in 2018, a 750 Watt unit with an 80 Plus Gold certificate that earned the “Recommended” award. The second one was the DQ850-M-V2L which was reviewed in 2020, bringing, for example, the 10-year warranty (instead of 5-years), but on the other side – it was rather noisy in low-mid load. Another two years have passed (coincidence?), and the next unit from Deepcool is in our hands, again with more wattage (it looks like a rule).