Core i9 13900K DDR5 7200 MHz (+memory scaling) review - Hardware & Software Used

Hardware & Software Used

We now begin the benchmark portion of this article, but first, let me show you our test system plus the software we used.

Mainboard

• MSI ACE Z790 (DDR5) 

Processor(s)

• Core i9 13900K

Graphics Cards

GeForce RTX 3090

Memory

• 2x 16 GB DDR5 7200 MHz (CL34) - TeamGroup T-Force Delta

Power Supply Unit

1200 Watt Platinum Certified Corsair AX1200i - Review

Monitor

Dell 3007WFP - QHD up to 2560x1600
ASUS PQ321 native 4K UHD Monitor at 3840 x 2160 - Review

OS related Software

Windows 11 64-bit (latest patches & updates installed) 
DirectX 9/10/11/12/DXR latest End-User Runtime  (Download)
Nvidia GeForce driver (latest WHQL) (Download) 

A Word About "FPS"

What are we looking for in gaming, performance wise? First off, obviously Guru3D tends to think that all games should be played at the best image quality (IQ) possible. There's a dilemma though, IQ often interferes with the performance of a graphics card. We measure this in FPS, the number of frames a graphics card can render per second, the higher it is the more fluid your game will display itself.

A game's frames per second (FPS) is a measured average of a series of tests. That test is often a time demo, a recorded part of the game which is a 1:1 representation of the actual game and its gameplay experience. After forcing the same image quality settings; this time-demo is then used for all graphics cards so that the actual measuring is as objective as can be.

• So if a graphics card barely manages less than 30 FPS, then the game is not very playable, we want to avoid that at all cost.
• With 30 FPS up-to roughly 40 FPS you'll be very able to play the game with perhaps a tiny stutter at certain graphically intensive parts. Overall a very enjoyable experience. Match the best possible resolution to this result and you'll have the best possible rendering quality versus resolution, hey you want both of them to be as high as possible.
• When a graphics card is doing 60 FPS on average or higher then you can rest assured that the game will likely play extremely smoothly at every point in the game, turn on every possible in-game IQ setting.
• Over 100 FPS? You either have a MONSTER graphics card or a very old game.

Monitor Setup

Before playing games, setting up your monitor's contrast & brightness levels is a very important thing to do. I realized recently that a lot of you guys have set up your monitor improperly. How do we know this? Because we receive a couple of emails every now and then telling us that a reader can't distinguish between the benchmark charts (colors) in our reviews. We realized, if that happens, your monitor is not properly set up.

Looking at the above graph, what are you looking for?

• Top bar - This simple test pattern is evenly spaced from 0 to 255 brightness levels, with no profile embedded. If your monitor is correctly set up, you should be able to distinguish each step, and each step should be visually distinct from its neighbors by the same amount. Also, the dark-end step differences should be about the same as the light-end step differences. Finally, the first step should be completely black.
• The three lower blocks - The far left box is a black box with in the middle a little box a tint lower then black. The middle box is a lined square with a central grey square. The far right white box has a smaller "grey" box that should barely be visible.

You should be able to distinguish all small differences, only then you monitor is setup properly contrast and saturation wise.