Final words and conclusion

Final words and conclusion

It's always great fun to move to a new platform and test coolers. When launched however we could not have seen the heat issues with Ivy Bridge processors coming. Whatever you fire off at it, Ivy Bridge remains hard to cool once overclocked with added voltage. A handful of processors can take 4600 MHz @ 1.2 Volts, but really there is only one in our test that kept the temperature acceptable, and that was the Noctua NH-D14, a cooler design that has proven itself to be leading, many times over the years. 

It is not all about cooling though, take for example HTPCs where you do not overclock. You want the more silent products used. None of the coolers tested today is really noisy, but the Noctua NH-L12 and Cooler Master GeminII SF524 both can't be heard. On the other side of the spectrum though, they perform the worst cooling wise. But with normal non-tweaked usage the temperatures will remain just fine, and they are designed for silence.

Aesthetics & design

The overall looks are important, you might want to go for performance but hate big dual-fan solutions, it's there where I find the Scythe product pretty nice. The Ninja for example is still a rock-solid looking product. But also the Cooler Master GeminII SF524 is just a great looking cooler. Then again, taste differs and is very subjective, so I'll leave that topic to rest for now.

Mounting systems

Mounting systems are always difficult with CPU coolers. The push-pull clips (Intel like) are fairly handy though dangerous as you need to apply a lot of pressure. The two cheapest Scythe products have these. Overall, Cooler Master has a fairly easy to install mounting system these days as well as the two Gelid products. The best however come from Noctua and Coolink with that Corator DS. Quality iron mounts with a very sturdy design. Included are the tools to install these product. The Alpenfohn K2 also has a mounting system very similar to that of the Noctua, and that one works great as well.

The mounting system for the Scythe Ninja and Mugen I consider to be downright horrible. On our TUF motherboard we had to remove the shielding as otherwise we could not even install the cooler. With the shielding removed it still was a pain in the proverbial ass to mount. You cannot reach the screws well enough. I've literally cut my fingers open on the aluminum fins during installation with these two products. My advice to Scythe, please go back to the drawing board as that's just messed up.

Pricing

Your needs, performance and pricing are the three major combining factors you base your purchase on, here's an overview:

The Scythe products are all surprisingly affordable these days, I really do still like the Ninja very much but the Scythe Grand Kama Cross Rev. B is just serious value for money. You need to accept the sheer size though. Mind you, I noted down the street (r)etail prices. For each cooler I noted down the lowest price with stock availability. Gelid is very affordable as well, but overclocking a 3770K with added voltage, it simply is too much for these two.

The Coolink Corator DS is definitely interesting in terms of what you get for the money, albeit slightly more noisy, and I like the Cooler Master GeminII SF524 for the money. For a little more dough you can get the Hyper 412S though, which is just great value for money.

The most expensive heatpipe coolers are the Noctua NH-D14 and Deepcool Assassin / Alpenfohn K2. Both excellent coolers, but the Noctua wins in performance and noise levels. HTPC wise I like the Noctua NH-L12 over the Cooler Master GeminII SF524, the reality however remains that for roughly the same noise levels the Cooler Master GeminII SF524 is the best value product for 35 bucks.

Final words

So, overall I'm pleased with what all the coolers did in terms of performance. Performance does come at a price as the best units were the most expensive, but as we've been trying to explain, it's not all about performance as not everybody will overclock their PC. The majority of coolers tested remain under 35 EUR and these offer great value for money. If you need that little extra then the 40+ EUR range comes into play.

It's all about choices though and with articles like shown today you can decide and fine-tune a little as to what is the most important thing for you, and that choice lies in performance, money or noise levels... well, that and size, mounting systems, number of fans, fan controllers, looks... etc...  *sighs* ;)

Cooler Master Hyper 412S Gelid GX-7 Scythe Mugen 3B Scythe Katana 4

Cooler Master GeminII SF524 Coolink Corator DS Noctua NH-L12 Scythe Ninja rev 3B

Deepcool Assassin / Alpenfohn K2 Noctua NH-D14 Scythe Grand Kama Cross Rev. B

• Sign up to receive a notice when we publish a new article
• Or go back to Guru3D's front page.