Product showcase – exterior

Product showcase – exterior

So the left side panel is made of tempered glass. 

The other one is made of steel (on the motherboard tray side).

We’d like to remind you of the basic specs here. The body is black, which is the most universal color.
At 467 (L) x 216 (W) x 465 (H) /18.38 in x 8.50 in x 18.31 in, the size is about average for today’s standards. The following motherboard form factors are supported:

• ATX,
• M-ATX,
• Mini-ITX

The left side panel is removable (and the front one too) after unscrewing four thumbscrews (well, that’s not the most convenient way).

The back panel is secured by captive thumbscrews.

Behind the front door (it has a logo there, on the bottom), there is an easily removable dust filter and three pre-mounted Corsair LL120 RGB 120 mm fans.

The front panel is secured by four quite long screws.

At the back, you can see 7 expansion slots. The rear (120 mm) fan mount allows some height adjustment. The PSU bay is located at the bottom, so no surprises here.

The manufacturer includes three LL120 RGB fans, connected with a 3-pin PWM fan cable.

When you look at the bottom section, you’ll find feet that have been rubberized to prevent unwanted movement of the chassis on the floor. The provided dust filter covers the PSU area. It’s easily removable for maintenance.

You'll find a (relatively) standard I/O panel on the top (like in most cases nowadays). It consists of a set of two USB 3.0 ports, reset and power buttons, and a shared audio jack for the mic or headphone function.

The top part has an easily removable magnetic filter. Let’s continue to the next page.