Corsair H80i GT review -
Introduction
120mm yet still cool runnings !
In this review we test the Corsair H80i GT Hydro Series Liquid cooler. This processor cooler is compatible with Corsair's LINK software allowing you to program, customize and monitor this all-in-one liquid cooling solution for your processor. Armed with two 120mm fans in a push-pull configuration and a nice extra thick 120mm radiator; the performance should be pretty okay. All that and you get configurable RGB lightning as well.
You know, in the world of CPU coolers nothing ever stops developing. These days you can pick a hundred different heatpipe based coolers, where many are shaped, formed and priced the same. The better heatpipe based coolers are good though. Next in line are LCS systems (liquid cooling), the entry level products are affordable, easy to install pre-fab liquid cooling kits. We've seen and tested many of them as Corsair, Asetek, CoolIT and so on all have interesting kits. The bigger problem is cooling performance. The gear behind these kits are good yet the performance is often battling a small included 120mm radiator with thin tubing and lacking coolant levels due to missing reservoirs. To compensate FAN RPM goes up making a good looking product noisy again. With that in mind Corsair started to develop a new series H (for Hydro) coolers.
The product we test in specific is the Corsair H80i GT, an updated design with new cooling block and regulated control for pump and fans. Next to that what's interesting is that this product is based on a sticker 120mm radiator (49mm) which gives it a little more cooling surface area. It is a cooler series that is easy on the eyes and comes with a relatively tool free installation. Next to some very good performance, the Corsair H80i GT is compatible with Corsair's LINK software. You hook up the LCS unit towards a USB port and then the software allows you to program, customize and monitor this easy to install Liquid Cooling solution. And hey within the new RGB concept, the logo at the top of the water-block can be configured to a color of your preference.
So without further ado, let's have a peek at the Hydro Series Corsair H80i GT and then head onwards into the review.
Headsets are one of the types of peripherals that Corsair offers (there are also PC components, but that’s not a story for this review). It ranges from budget-oriented HS series (the reviewed one is one of them), then there’s the mid-range Void series, and it ends with high-end Virtuoso. The HS series starts with HS35, and till now, it also contained HS45, HS50, HS55, HS60, HS65, HS70, HS75, and HS80 (some of them had different, wireless variants). We’re checking out the all-new Corsair HS65 Wireless in this review (today is the debut).
Corsair H170i Elite Capellix XT review
Corsair has announced an updated line of liquid coolers, and we have the Corsair H170i Elite Capellix XT edition on our test bench to see how the most beefy triple-fan 420mm model performs. The kit co...
Corsair Vengeance RGB DDR5 6000 CL36 review
In July, Corsair presented a new series of DDR5 memories: the Vengeance RGB DDR5. The available kits from the RGB edition have a frequency higher than the base 4800 MHz (5200-6600 MHz); the non-RGB version starts from 4800 MHz. We are checking the Corsair Vengeance RGB 6000 MHz CL36 DDR5 kit today. It's in the middle frequency in the series. We already had an opportunity (almost three years ago) to review the Vengeance (Pro) RGB series RAM, but it was for the DDR4; the frequency was 3200 MHz, and it received a "Top Pick" award, and also the Vengeance RGB Pro SL which had 3600 MHz frequency (with CL18) and got the "Approved" award. But let's focus back on the tested DDR5 kit.
Corsair Katar Elite Wireless mouse review
In this article, we review the Corsair Katar Elite Wireless mouse. It’s an optical gaming mouse that was launched today, on 26.10.2022. The Katar model is a new version of the Katar Pro Wireless that was introduced on October 2020. The Katar Elite Wireless is targeted at gamers, but it should also work more than fine as a regular mouse. This time, the optical sensor is not the 10K DPI PMW3325 but a 26K DPI Corsair Marksman. It has 1 DPI resolutions steps, 650 IPS tracking, and up to 50G acceleration.