Corsair H60 (2018) review

Cooling 189 Page 6 of 12 Published by

teaser

Product Installation


 Img_0412

Mounting the cooler is a relatively easy thing to do, though the motherboard needs to come out of the chassis unless you have a chassis with a mainboard cutout for CPU cooling. Now you first prepare the backplate, nuts need to be aligned with the holes by shifting them into position. You can and should position the backplate 100% similar to shown above, that's the only right way.
 

Img_0413


You should have already inserted your processor, applying thermal paste is not needed as the kit comes with TIM applied to the cooling block. With the backplate in place, we now install four standoff screws like shown above. The next step is to place the mounting bracket on the top of the pump so we can screw stuff together tightly.
 

Img_0414

 
Once we seat the cooler in the position it aligns up with four standoff screws. With the help of a screwdriver, we can secure four thumbscrews. Turn them tight until they can go no further. The installation is really simple and a quick fix.

 

Untitled-534

Share this content
Twitter Facebook Reddit WhatsApp Email Print