Corsair H150i Elite LCD review -
Product Showcase
Here we have the new ML140 RGB Elite, these have operational speeds of 450 RPM to 2,000 RPM (120mm) and 400 RPM to 1,600 RPM (140mm). Eight ARGB LEDs help add some flair to the cooling fans. fans. You obviously get two of these, all PWM-based as stated. The ML series is short for magnetic levitation; at low RPM, these fans offer quite a bit of airflow while that low RPM offers low noise. Once they pass ~1300 RPM, it's quite the opposite, though. These RGB fans have 8x LEDs each, individually programmable. At 12v, the ML fans are noisy as heck, but the rating on these fans is insane as they can move so much air, even at low RPM, and that is what we are after; low noise levels offering good cooling performance. You can select multiple preset modes ranging from silent to performance in the software as well as a zero RPM mode, which deactivates the fans up-to a coolant temperature of 40 Degrees C. The default (balanced) configuration keeps things rather silent. We'll show you all that in the software overview, though.
When we flip it around, we see the radiator a little better. Easy to mount, most big-tower chassis have pre-fitted holes and space for 240/280/360/420mm rads these days. The unit actually measures 360x 120mm x 27mm.
Here we have the cooling block. Being an I series (iCUE compatible) cooler, there was typical quite a bit of cabling tied to the unit. However, that has been revised. Just one cable leads to the HUB (NODE) and one cable to the motherboard (pump RPM). In addition to the pump head, the iCue Elite LCD coolers are equipped with a 2.1-inch IPS LCD screen for easy viewing. The screen has a resolution of 480 × 480 pixels and a refresh rate of 30 frames per second. It can be used as a valuable dashboard for displaying the health of your computer system. You can, however, personalize it to your satisfaction by including a one-of-a-kind animation or your favorite meme.
When we flip the CPU cooling block/pump around, we see an all copper base, with TIM (thermal grease) already applied for you. Not exactly a mirror / lapped finish through the performance is good, as you'll find out soon enough.
The block also includes an LED ring with up to 24 ARGB LEDs, which can be controlled using the Corsair iCue software included with the display. If you already own an iCue Elite Capellix coolers, you may upgrade the LCD display of your CPU cooler with the iCue Elite CPU cooler LCD display upgrade kit, which costs $99.99.
The Corsair K70 RGB Pro keyboard is the one we’re reviewing today. It’s not the first one from the K70 series checked on guru3d. Previously those were K70 RGB Rapidfire Mk2, also in a low-profile version, and as a TKL, so overall, there shouldn’t be any significant surprise as far as the general concept goes. Corsair K70 RGB Pro takes some K100 RGB and (most of) K70 RGB TKL CHAMPION (already mentioned) features. The suffix “Pro” wasn’t used yet, so probably it was the right time for that.
Corsair 5000T RGB TG - PC chassis review
Corsair is back with a new kickass chassis; this time, we're testing the Corsair 5000T RGB. It's a unique chassis with plenty of room, concealment choices, and clearance for a large amount of liquid...
Corsair H150i Elite LCD review
Corsair has a refresh of liquid coolers, this round the Corsair H150i Elite LCD (IPS) edition is put on our test bench where we can check out the behavior of the triple-fan 360mm model. Corsair has p...
Corsair M65 RGB Ultra mouse review
In this article, we review the Corsair M65 RGB Ultra mouse. It’s an optical mouse that was launched on 21st September. It’s a new release from the M65 series, which was introduced already seven years ago. After two years – the Pro edition was introduced, and in 2019 there was an M65 RGB Elite version; what do we have now?