Product Showcase
Here we can see the left side panel, with quick release hinges. The backside itself reveals a thing or two as well.
The size of the chassis by the way is 20" (H) x 23.3" (L) x 10.4" (W) - (507mm x 592mm x 265mm). Next to the rear IO we spot a 120mm fan. The chassis comes with three fans and all can be PWM fan controlled, in fact the 600T has the a fan controller mounted onto the top of the chassis, we'll show you that later on.
Next to the 8 card slots we see two grommet holes, these could be used for some sort of external liquid cooling or to lead out a USB 3.0 front panel cable that needs to be connected to the rear IO.
Much like the 650D we recently reviewed, we do hope with the next revision of this Corsair chassis, that they will move to the standard internal USB 3.0 connector as designed and form factored by Intel.
I mentioned it already, but the side panel window can be replaced with a mesh, included (both come standard) in the package. Other than that, a small manual, screws and tie-wraps are included in the bundle.
Also notice that both the side panels have these very handy quick release hinges that open and secure the panels really easy.
On top we see a huge mesh. Great ventilation, the 600T comes with a 200mm fan installed there. Again, it can be fan controlled by the chassis. Obviously you can go nuts with other fans here as well as installing a LCS (liquid cooling system) radiator. A dual 120mm radiator would be fairly easy to install. But we'll show you some photo's of the inside on the next pages as well.