Product showcase – interior
The Cooler Master Silencio S600 is equipped with one 120 mm fan in the front. You can install up to two 120mm/140m fans in total. This amount of space is enough to fit even a 280 mm radiator (according to the manufacturer). There is also a removable fan filter.
As you can see, the cut-out in the PSU shroud is almost 80 mm across, so you can mount standard AIO radiators (with fans that are typically 25 mm thick) in the front of the case.
The back side of the Cooler Master chassis is clean, and it should be relatively easy to route all the cables properly in there, especially that the cable pass-throughs with rubber grommets are slightly angled, so you’ll have a bit more space on the back side of this area.
Clearance varies depending on where you measure it. It’s in a range between 18 and 26 mm, and the latter value is quite nice.
On the lower-left side, there is space for up to three 3.5” drives. The standard cables include USB 3.2 gen 1, and front panel connections (with HD audio). The cabling is black, which improves the aesthetics of the whole package. No fan hub is included (but that’s not a problem considering the budget).
