Cooler Master Nepton 240M review

Cooling 190 Page 9 of 12 Published by

teaser

Core i7 3770K Baseline test

Testing The Coolers

Time to test. Today's tested cooler will work absolutely great with any processor from low to high-end (Core i3/Core i5/Core i7 quad-core and even six-core included up-to 130W) at default operating frequencies, of course there's room left for overclocking as well. We have built a new test system policy for cooling benchmarks. 

Core i7 3770K Baseline IDLE Temperatures

Let's have a look at the results for the system in its default non-overclocked state. Below, the IDLE temperatures, thus your processor is doing barely anything to nothing. Just sitting and waiting in your system.

 Untitled-1

None of the coolers obviously have any issue whatsoever in IDLE with the Core i7 3770K not overclocked. But you can already see a pattern though. 

Core i7 3770K Baseline LOAD Temperatures

Untitled-2 

Now let's have a look at the processor's LOAD temperatures (in the non-overclocked state). We measure in a 21 Degrees C ambient room temperature. Ambient temperatures do effect the cooling performance, albeit a little bit.

Guru3D's rule of thumb on CPU load vs cooling temps:

  • Anything at roughly 50 Degrees C or lower we consider enthusiast class cooling
  • Anything in-between 51 to 60 Degrees C we consider performance cooling
  • Anything in-between 61 to 70 Degrees C we consider mainstream cooling
  • Anything above 71 Degrees C we consider average cooling

That is at roughly performance cooling, fairly good for a kit priced like this. Let's immediataly deal with sound and noise levels shall we?

Share this content
Twitter Facebook Reddit WhatsApp Email Print