Product Installation
We are testing externally but you get the idea here. As mentioned there is a bit of wiring to manage, so I wanted to show you that a little better on this page.
Here you can see that to the left there is one cable connected to PSU molex, these are the two fans combined with the Y-Splitter cable. Then from the pump we feed a third FAN header. Let me zoom in here as it is important:
Here you can see that a little better. You connect the pump towatrds this cable. Initially I connected the pump towards the CPU FAN header of the motherboard, and that will result in up-to ~12V, and that makes the pump very noisy.
Once powered on there won't be any LEDs or something. Installation wise that is all there is to it. A fairly simple and clean installation, there's very little stuff complicated about this unit.