Biostar GeForce 7600 GS V-Ranger Edition

Graphics cards 1048 Page 3 of 11 Published by

teaser

Page 3

Temperatures of the graphics cardlinkbuttonbot.jpg

BioStar is using a non-standard cooler, and quite frankly it's not very good. The core temperature idles at roughly 50 Degrees C, but when there is 100% utilization of the GPU then we see a near 80 Degree temperature. For a successful overclock this is going to be a hinder, which is a shame because in one hand we have the power to overclock but in the other... heat will limit that greatly.

table_tl.gif

blank.gifGPU and Memory Clock frequencies during a burn-in test

table_tr.gifblank.gif Biostar GeForce 7600 GS Overclocking Edition w/ V-Ranger review - Guru3D.com 2006 blank.giftable_bl.gif blank.gif table_br.gif


Noise Levels coming from the graphics card
linkbuttonbot.jpg

When graphics cards produce a lot of heat usually that heat needs to be transported away from the hot core as fast as possible. Often you'll see massive active fan solutions that can indeed get rid of the heat, yet all the fans these days make the PC a noisy son of a gun. I'm doing a little try out today with noise monitoring, so basically the test we do is extremely subjective. We bough a certified dBA meter and will start measuring how many dBA originate from the PC. Why is this subjective you ask? Well, there is always noise in the background, from the streets, from the HD, PSU fan etc etc, so this is by a mile or two not a precise measurement. You could only achieve objective measurement in a sound test chamber.

The human hearing system has different sensitivities at different frequencies. This means that the perception of noise is not at all equal at every frequency. Noise with significant measured levels (in dB) at high or low frequencies will not be as annoying as it would be when its energy is concentrated in the middle frequencies. In other words, the measured noise levels in dB will not reflect the actual human perception of the loudness of the noise. That's why we measure the dBa level. A specific circuit is added to the sound level meter to correct its reading in regard to this concept. This reading is the noise level in dBA. The letter A is added to indicate the correction that was made in the measurement.

We startup a benchmark, we take the dBA meter, move away 75 CM and then aim the device at the active fan on the graphics card.

We measure roughly 47 dBa on the PC with a BioStar 7600 GS, which is to be considered a an average noise level coming from the PC. Again, this is a very subjective test.

table_tl.gif

blank.gifAn example of how we measure.

table_tr.gif
blank.gif

TYPICAL SOUND LEVELS

Jet takeoff (200 feet)

120 dBA

 

Construction Site

110 dBA

Intolerable

Shout (5 feet)

100 dBA

 

Heavy truck (50 feet)

90 dBA

Very noisy

Urban street

80 dBA

 

Automobile interior

70 dBA

Noisy

Normal conversation (3 feet)

60 dBA

 

Office, classroom

50 dBA

Moderate

Living room

40 dBA

 GeForce 7600 GS Galaxy

Bedroom at night

30 dBA

Quiet

Broadcast studio

20 dBA

 

Rustling leaves

10 dBA

Barely audible

Biostar GeForce 7600 GS Overclocking Edition w/ V-Ranger review - Guru3D.com 2006

Card Sound Level in measured inDBa GeForce 7600 GS BIOSTAR 47 GeForce 7600 GT 48 GeForce 7900 GT 50 GeForce 7900 GTX 44 blank.giftable_bl.gif blank.gif table_br.gif

Share this content
Twitter Facebook Reddit WhatsApp Email Print