Product Installation

Product installation

 The installation process has been described in a detailed way in the included manual, and you can find it online as well. For me, it was nice that it’s is also provided in Polish.

You start with the backplate, installed with four washers (which should be sticked to the back of the motherboard). Most modern cases have a big cut-out for the CPU cooler, so there should be no need to pull the motherboard out to install the backplate.

You need to install two mounting arms the CPU block to be able to install the Liquid Freezer. There are four standoffs for which you also need to use washers (also with sticky tape).

For the sake of the review, we used Thermal Grizzly Kryonaut as a thermal paste. With the paste applied, all that needs to be done is to slide the CPU block into place and secure it.