Aorus Liquid Cooler 360 review -
Processor baseline performance test
Testing the cooler
Time to test. Today's tested cooler will work absolutely great with any processor from low to high-end at default operating frequencies, of course, there's room left for overclocking as well. We have built a new test system policy for cooling benchmarks. Let's have a look at the results for the system in its default non-overclocked state. Below, the IDLE temperatures, thus your processor is doing barely anything to nothing. Just sitting and waiting in your system.
If you have a look at the chart above you can see the processor LOAD temperatures (in the non-overclocked state). We measure in a 21 Degrees C ambient room temperature. Ambient temperatures do affect the cooling performance, albeit a little bit. We note down the hottest measured CPU package temperature.
Guru3D's rule of thumb on CPU load vs cooling temps:
- Anything up-to to roughly 50 Degrees C or lower we consider enthusiast class cooling
- Anything in-between 51 to 60 Degrees C we consider performance cooling
- Anything in-between 61 to 70 Degrees C we consider mainstream cooling
- Anything above 71 Degrees C we consider average cooling
This LCS kit thus sits at the threshold of performance cooling at processor default clock frequencies.
Gigabyte has unleashed a new Aorus cooler, this round with fully addressable aRGB, an and OLED enabled pump. That offers new bling options and really terrific looks. But is it all that it promises it ...