Product showcase – interior
The Anidees AI-Crystal XL AR is equipped with four removable 120 mm fans up front. It’s possible to replace them with three 140 mm units.
That space can support 480mm radiators up to ~100 mm thick in the front (when the fans are moved outside) in push orientation.
If you’d prefer to use a push-pull radiator configuration it would be 75 mm of space. If that is not enough, the whole PSU cover can be removed. The RGB LED Fans has its own fan hub and controller (Remote controller) Fan controller on the front I/O can controller only with 3 pin case fans on the case default 3 pin fan hub. It can control RGB Fans on the case.
The backside of Anidees chassis is clean. It would be nice to have a bit more space for cable routing, as it varies from 20 mm (which sometimes can be troublesome) on the right side, to ~40 mm on the left.
At the lower right side, there are SSD trays visible.
The upper left shows a PCB, it's a multiport fan HUB linked to a RGB LED unit that cooperates with the remote control, offering full speed and lighting adjustment. You can also move between the various flashing and pulsing modes on offer. Fans are already connected to the hub.