AMD Ryzen Threadripper 1920X review

Processors 199 Page 8 of 30 Published by

teaser

Power Consumption & Temperatures

Power Consumption

In an IDLE state, a PC (motherboard / processor / GTX 1080 / memory / SSD) consumes roughly 90 Watts. This number depends and will vary per motherboard (added ICs / controllers / wifi / bluetooth) and PSU (efficiency). Keep in mind that we measure the ENTIRE PC, not just the processor's power consumption. Your average PC can differ from our numbers if you add optical drives, HDDs, soundcards etc. 


33413_untitled-3

* In blue Threadripper 1920X and in black Threadripper 1950X

As you can see, fof a 16-core part the power consumption remains at very acceptable numbers. There is one thing we need to address though. Threadripper has two 8-core dies, effectively you could say that there are two processor active. And that does show in IDLE power consumption. Your average 4 or 8-core PC runs in the 50 Watt domain at idle, threadripper 1920X sits just above 90 Watts, which is worthy of a mention alright.

I want to make it very clear that power consumption measurements will differ per PC and setup. Your attached components use power but your motherboard can also have additional ICs installed like an audio controller, 3rd party chips, network controllers, extra SATA controllers, extra USB controllers, and so on. These parts all consume power, so these results are a subjective indication. Next to that, we stress all CPU cores 100% and thus show peak power consumption. Unless you transcode video with the right software your average power consumption will be much lower.
  

Image15

 
We use the 240mm radiator based Corsair Hydro H105 review. Threadripper 1920X is being stressed with a couple of 1024M Prime runs. You can see a reported maximum 80 Degrees C, for the die temperature you need to deduct and compensate 27 Degrees C, which is 53 Degrees C, the true temperature according to AMD. Below you can read how that works.

Temperature Reporting

To keep a "consistent fan policy," AMD is forcing 20C offset on the Ryzen 1700X and 1800X processors. This makes them report temperature a good 20C above what the sensor reads. All models on the AM4 Platform have the same maximum tCTL value.

Threadripper has the same thing and have a 27 Degrees C offset. The primary temperature reporting sensor of the AMD Ryzen processor is a sensor called “T Control,” or tCTL for short. The tCTL sensor is derived from the junction (Tj) temperature—the interface point between the die and heatspreader—but it may be offset on certain CPU models so that all models on the AM4 Platform have the same maximum tCTL value. This approach ensures that all AMD Ryzen and thus Ryzen Threadripper processors have a consistent fan policy.

Specifically, the AMD Ryzen Threadripper uses a +27°C offset between the tCTL° (reported) temperature and the actual Tj° temperature. In the short term, users of the AMD Ryzen Threadripper can simply subtract 27°C to determine the true junction temperature of their processor. 
 

Product NameTrue Junction Temp (Tdie)tCTL Offset for Fan PolicyTemp Reported by (tCTL)
Threadripper 1950X 43°C 27°C 70°C
Threadripper 1920X 43°C 27°C 70°C
Ryzen 7 1800X 38°C 20°C 58°C
Ryzen 7 1700X 38°C 20°C 58°C
Ryzen 7 1700 38°C 0°C 38°C

Share this content
Twitter Facebook Reddit WhatsApp Email Print