AMD Radeon R9-285 review

Graphics cards 1047 Page 3 of 21 Published by

teaser

A new Island and Technology

Over the past years you have been hearing about several codenames and that can be a little confusing. It's simple really, in the market we have entry level, mainstream and high-end products. When you notice 'Cape Verde' that's entry level, the 7700 series that was just released. Pitcairn would be the codename the mainstream products (7800) will hide under, and Tahiti is the codename for the GPUs used on AMD's most high-end graphics cards. 

  • Entry level = Cape Verde = Radeon HD 7700 series / R5 series
  • Mainstream level = Pitcairn = Radeon HD 7800 series / R7 series
  • High-end level = Tahiti = Radeon HD 7900 series / R9 series
  • Enthusiast level Hawaii = R9-290 and 290X

The entire segment from top to bottom has been released in Q1 2012, but most of the 2013/2014 models are respins, the exception being the R7-260X,  R9-290/290X graphics cards and thus now Tonga (Tonga is an archipelago in the South Pacific Ocean) on the Radeon R9 285.

R9 270X (previously the R7870 Ghz / Pitcairn)

  • Stream Processors 1280
  • Clock Frequency up-to 1.05 GHz
  • 2.69 TFLOPS compute performance
  • 2 or 4 GB memory at 5.6 Gbps
  • 180W TDP
  • PCI-E 3.0
  • API - DirectX 11.2 / OpenGL 4.3 / Mantle

R9 280 (previously the R7950 / Tahiti)

  • Stream Processors 1792
  • Clock Frequency up-to 950 MHz
  • 3.6 TFLOPS compute performance
  • 3 GB memory at 5.0 Gbps / 384-bit
  • 225W TDP
  • PCI-E 3.0
  • API - DirectX 11.2 / OpenGL 4.3 / Mantle

R9 285 (Tonga)

  • Stream Processors 1792
  • Clock Frequency up-to 918 MHz
  • 3.29 TFLOPS compute performance
  • 2 GB memory at 5.5 Gbps / 256-bit
  • 190W TDP
  • PCI-E 3.0
  • API - DirectX 12 / OpenGL 4.3 / Mantle

The Radeon R9 285 has 1792 activated stream processors making it perform at GeForce GTX 760  and Radeon HD 7950 level performance but with  better thermals and lower power consumption. The R9 285 is designed to offer performance roughly of the Radeon R9 280 but is more energy-efficient.

Img0045305

R9 280X (previously the R7970 Ghz / Tahiti)

  • Stream Processors 2048
  • Clock Frequency up-to 1 GHz
  • 4.1 TFLOPS compute performance
  • 3 GB memory at 5.6 Gbps / 384-bit
  • 250W TDP
  • PCI-E 3.0
  • API - DirectX 11.2 / OpenGL 4.3 / Mantle

So, much like NVIDIA has done with the 700 series AMD is doing something very similar. The R7 260X is a new GPU, but the R9 270X and R9-280/280X both are derivatives of the Pitcairn and Tahiti GPUs respectively. And who can remember Oland, that mobile GPU? Well peek at the R7 250 specs, looks familiar right? There are a number of changes though to be found in clock and memory frequencies so overall there will be slight performance increments. And much like NVIDIA does, AMD now fully implemented a 'Turbo' feature much like NVIDIA's boost technology on all of their products.


Untitled-6


This means that there is no longer a fixed clock on these cards. The GPU clock will get a baseline and maximum frequency, in-between these two values the card will clock up/down based on power draw/limiters, performance and heat. In return the card will adaptive manage fan control, clock frequency and voltages (dynamic). AMS always has been much more reserved with the difference in-between baseline and maximum frequency, so the difference in values won't be extremely big.

28nm Technology

The GPU architecture has remained the same though comparable towards the last-generation products, AMD still uses the 28nm process technology, the cards are PCIe gen 3 compatible and there have been significant changes on power consumption. We'll address all the features separately of course. With the launch of the R7 and R9 series you will also see Eyefinity updated towards version 2.0 DDM, audio is now fully supported (you hear audio on the actual monitor it's played off), the 5x1 landscape mode is introduced, and you may now create custom multi-monitor resolutions.
 

Untitled-2

Interesting is that AMD implemented next generation digital multipoint audio with smart channel splitting. So if you setup Eyefinity with three screens the six speakers in your monitors will now be configured as front left/mid/right channels. Very clever.
 

Untitled-4

Eyefinity also has received a small update. You can now mix and match any monitor (similar monitors) output and create an Eyefinity setup. So if you have three of the same monitors you could hook up one towards HDMI, once to DVI and once to DP. That is the kind of flexibility we like a lot alright.

Share this content
Twitter Facebook Reddit WhatsApp Email Print