Features & Specs: 

System Requirements:

• “A” type plug with USB interface (regardless of existence of M/B or USB interface card.)
• Windows 98 or above needed to execute USB utility program
• Hard Disk space for 5 MB

Features:

• Tally with the USB V.1.1 12 Mbps specifications
• Support for Win98 & Win2000
• Can support network drive program under Windows 98/2000
• Support TCP/IP. NetBEUI, IPX/SPX Network protocols
• Reach top transmission speed of 11 Mbps
• Can agree with the Home, SOHO, LAN for company’s department
• Can link with old network (example: Ethernet) by using a Soft-router
• Can connect up to 127 sets for a PC (in order to optimize performance and efficiency, it is suggested that no more than 20 sets at most)
• Does not need a expensive main server and scant user’s cost for peer to peer architecture
• Simple maintenance. If off-line, just “Hot insert-put out” again.
•  

The prototype we received contained a USB network cable, the installation disk, and the installation manual. The installation manual is very well defined which will make it even easier than it already is for the non-techies out there. It contains precise step-by-step installations for setting up a simple two-computer network, connecting to an already existing network and instructions for Internet sharing.