Xigmatek Orthrus SD1467 HSF
Ooh, daang that is just weirdness ! Xigmatek introduces the Orthrus SD1467, a new high-end processor cooler with a copper base and seven 6mm diameter heatpipes. Five heatpipes guide the heat to the main aluminium heatsink, which is cooled by a 140mm PWM fan with white LEDs, while the other two heatpipes direct the heat to a smaller heatsink that's cooled by a 80mm PWM fan, which also has white LEDs.
The cooler measures 146mm x 200mm x 165mm and weighs 875g (w/ dual fans). The 140mm model pushes up to 79.84 CFM of air at a noise level of up to 35.0dBA, while the 80mm fan delivers up to 23.83CFM at a noise level of 28.7dBA. Both fans have FCB (Fluid Circulative Bearing) with a life expectancy of 50,000 hours.
The 140mm fan delivers a static pressure of up to 1.831 mmH2O, and the 80mm up to 1.93 mmH2O. Xigmatek says the cooler can dissipate up to 180W of heat. Pricing and availability is unknown.
Xigmatek Janus low-profile HSF - 05/17/2013 07:27 AM
Xigmatek launches Janus, a low-profile HSF with a nickel-plated copper base, six 6mm diameter nickel-plated copper heatpipes, and a large auminium fin array. There are two fans but they're arranged i...
XIGMATEK Dark Knight Frostbourne Edition CPU Cooler - 03/01/2013 09:07 AM
Oh my, that does look good. XIGMATEK released the Dark Knight Frostbourne Edition CPU Cooler which is completely the opposite of their Dark Knight SD1283 Nighthawk Edition. With a pricetag of 50 USD ...
Xigmatek PRAETON LD963 CPU Cooler - 10/30/2012 12:17 PM
Xigmatek released the new PRAETON LD963 CPU cooler. It is compatible with Intel (LGA 1366/1156/1155/775) or AMD (FM1/FM2/AM2/AM2+/AM3/AM3+) processors with a TDP of up to 115 W. Measuring 104mm x 93mm x 44mm, the PRAETON LD963 features three 6 mm heatpipes using H.D.T. (Heat-pipes Direct Touch) technology, aluminum alloy fins, and a 90 mm Hydraumatic bearing fan operating at 1200 to 2800 RPM (maximum sound output if 22 dBA).
Xigmatek Apache III CPU Cooler - 10/22/2012 05:45 AM
Xigmatek is working on a new CPU cooler, it is the the value model Apache III that comes with a radial fin design.
Xigmatek Asgard 382 mid-tower - 10/09/2012 05:58 AM
Xigmatek is going to release the Asgard 382 which is a new mid-tower case series that will arrive in no less then six versions; three with side window and three without. The case measures 505mm x 445m...