Years ago I was a big fan of Lian-Li, but looking at their latest designs it seems they are getting stuck in the past. Anyway, Lian Li Unveils the PC-10N Mid-Tower PC Chassis a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N. Besides allowing for a 240 mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management.
Side Mounted 240 mm Radiator Support A hinged bracket directly across the CPU allows DIY builders to install a 240 mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.
Railing Mount Motherboard Tray Lian Li's railing mount technology greatly improves airflow under the motherboard, helping systems run cooler. This design replaces the traditional solid motherboard tray which can block airflow and adds to system weight and cost. The railing system also provides better routing options for internal wiring and cables, reducing clutter, improving system appearance and further improving airflow.
Tool-Less Hard Drive Installation Hard drives can be tool-lessly installed in the PC-10N. The six 3.5" drives and one 2.5" drive are secured in the two HDD cages by quick-access thumbscrews with rubber suspensions to greatly reduce irritating noise and vibrations. An additional 2.5" can be installed using four standard screws. Additionally, the top HDD cage can be removed tool-lessly allowing for increased airflow and more space for longer expansion cards.
Thermal Design Two 120 mm fans with air filters located in the front of the chassis pull in cool air. Once the front bezel is tool-lessly popped off, the front fans can be effortlessly removed. The rear 120 mm exhaust fan pulls hot air out of the chassis, and an additional 120 mm fan can be installed in the top panel.
Compatibility VGA cards up to 300 mm (11.81") in length can fit in the PC-10N when the top HDD cage is not removed, and 430 mm (16.9") when the cage is. CPU coolers up to 155 mm are supported.
The Lian Li PC-10N also supports power supplies up to 300 mm (11.81 inches). Ventilation slits underneath the PSU, with a removable pull-out air filter, help increase the life and performance of the power supply and system.
Connectivity The front I/O panel is stylishly placed on an angle on the right side of the front panel and contains two USB 3.0 ports and HD audio connections.
The PC-10N is available in two color options: silver (PC-10NA) and black (PC-10NB).
Supports ATX and Micro-ATX motherboards
Side mounted 240 mm radiator support
Railing mount motherboard tray
Holds up to six 3.5" HDDs and two 2.5" HDDs
Front I/O panel: Two USB 3.0 ports and HD audio connections
Tool-less side panels
Two color options: Silver and Black
Two color options: Silver (PC-10NA) and Black (PC-10NB)
Lian Li launches weirdest PC-Q30 chassis evah ! - 05/14/2013 02:24 PM
Lian-Li announces a new brushed aluminum Mini-ITX chassis ? PC-Q30. With its curve-shaped design and large acrylic front window the fully aluminum PC-Q30 allows users to show off their systems, and is...
Lian Li PC-Q27 and PC-Q28 Mini-ITX cases - 04/19/2013 07:15 AM
Lian Li spreads word that they will release two new aluminium cases for Mini-ITX builds; the PC-Q27 and the PC-Q28. Both cases will become available in May, the PC-Q27 has a MSRP of $78.99 while hte P...
Lian Li PC-9N Mid Tower Chassis - 02/22/2013 08:36 AM
Lian-Li announces a new brushed aluminum mid tower chassis, the PC-9N. Supporting ATX and micro-ATX motherboards, the PC-9N forgoes the traditional motherboard tray, and instead implements a railing m...
Lian Li PC-D8000 Chassis - 10/09/2012 11:00 AM
Lian-Li announces the massive brushed aluminum HPTX supported chassis &ndash; PC-D8000. Able to hold up to twenty 3.5" hard drives, two power supplies and one of the largest motherboard form...
Post New Comment
Click here to post a comment for this news story on the message forum.