Innodisk, the service-driven flash provider, announces a new series of high performance industrial SSDs. Available in standard 2.5" SATA III as well as SATA Slim formats, the 3MG2-P series uses a custom new ID201 controller, synchronous NAND flash and 19 nm manufacturing process to produce high sequential speeds and random IOPS, while preserving industrial level reliability, power protection, and ruggedness.
High Performance Industrial no longer means slow. Innodisks' 3MG2-P SSDs use a new generation of flash technology to combine reliable and rugged design with superior performance. The use of select synchronous NAND flash, with a custom ID201 flash controller and on-board- DRAM mean the 3MG2-P series achieves 530/460 Sequential Read/Write speeds and 80/76K random IOPS performance. The use of a smaller 19 nm process not only helps performance but also allows the 3MG2-P to be offered in a 1 TB capacity.
2.5” SATA III solution for industrial field
7mm height mechanical design
Intelligent error recovery system
iSMART disk health monitoring
iData Guard for abnormal power failure
iCell technology for data protection (optional)
The new 3MG2-P SSDs are designed and rigorously tested to ensure industrial-grade reliability. Featuring Evergreen L2 architecture, the life span of the SSD is maximized by an evolved wear leveling algorithm. Tested by JEDEC 218, write amplification has been reduced while strong error correction ensures reliable performance for the life of the SSD. Shock and vibration resistance is built in, and the 3MG2-P SSDs have been rigorously power cycle tested at -40℃ and 85℃ to ensure normal operation at a wide temperature range.
Advanced Power Management Better power management than ever is available with the 3MG2-P series. Lower power consumption is achieved with DEVSLP support, meaning longer battery life in the field and lower running costs in the data center. The new SSDs also feature Innodisk iData Guard to protect against unexpected power failures. When the SSD detects power is lost, a special power protection algorithm uses onboard power to save volatile data to non-volatile storage.
Not just a product spec, iData Guard on the 3MG2-P has been rigorously tested under diverse power conditions, including being power cycled on and off while writing data. Even after thousands of power cycles the SSD can function normally. iData Guard ensures data stored on the 3MG2-P is reliable even when power is not.
Product Availability 3MG2-P SSDs will be offered in capacities from 8 GB to 1 TB. The 8 GB to 256 GB versions are currently available while the 1 TB model will become available in September 2014, along with a M.2 2280 form factor version.
With both industrial grade and standard versions offered, the 3MG2-P series of SSDs from Innodisk gives enterprise users the reliability they've been looking for, and industrial customers the performance to handle more demanding applications.
Innodisk makes ddr3-adapter for M.2 SSDs - 06/06/2014 09:00 AM
Yeah, you read that right, a DDR3 Memory adapter for M.2. SSDs ?! Innodisk is a manufacturer for memory and storage products as many of you know. Now if you'd use NAND flas as system memory then a ...
Innodisk nanoSSD does 480MB/s - 05/24/2013 06:41 AM
Innodisk shows off the nanoSSD, a finger-tip sized SATA µSSD that measures just 16mm x 20mm x 2mm (W x L x H). Capacities range from 4GB to 64GB, and the disk features read speeds of up to 480MB/s an...
Innodisk iSLC - MLC with higher endurance - 03/30/2013 09:48 AM
Innodisk is working on iSLC NAND flash memory, a new technology that should dramatically improve the endurance of conventional MLC NAND flash memory chips. Whereas today's MLC NAND memory chips have ...
Post New Comment
Click here to post a comment for this news story on the message forum.