Radeon HD 5750 review (Crossfire) -
Overclocking & Tweaking
Overclocking & Tweaking
As most of you with most videocards know, you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simple, tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need?
One of the best tool for overclocking NVIDIA and ATI videocards is our own Rivatuner that you can download here. If you own an ATI or NVIDIA graphics card then the manufacturer actually has very nice built in options for you that can be found in the display driver properties.
Where should we go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners not to increase the frequency any higher then 5% of the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it ;)
All in all... do it at your own risk.
Above you can see the overclocked results for Crysis WarHEAD, same image quality settings as before.
| Original | This sample | Overclocked with Rivatuner |
| Core Clock: 700MHz | Core Clock: 700MHz | Core Clock: 836MHz |
| Shader Clock: 700MHz | Shader Clock: 700MHz | Shader Clock: 836MHz |
| Memory Clock: 4600MHz | Memory Clock: 4600MHz | Memory Clock: 5312MHz |
So we could not push the card much further really as we'd run into issues, but 800~825 MHz seems pretty doable for the 5750 cards. Giving it a really nice boost towards 5770 performance for free.
We test and review the Gigabyte Radeon HD 7790 2GB OC edition, also known under SKU code GV-R7790OC-2GD. We benchmark the product incl FCAT Frametimes. The new graphics card is intended to boost a little more performance into entry-level gaming. The Gigabyte HD7790 OC 2GB clocks in at 1075 MHz on the boost engine, packed with totally silent custom cooling.
MSI Radeon HD 7790 TurboDuo OC review
We test and review the MSI Radeon HD 7790 OC edition, also known under SKU code R7790-1GD5-OC incl FCAT Frametimes. The new graphics card is intended to boost a little more performance into entry-level gaming.
Radeon HD 7990 review
We review the new AMD Radeon HD 7990 including FCAT frametime measurements. The dual GPU product that you guys learned to know under codename Malta finally is released. AMD it doing it in style, two fully equipped Tahiti XT2 GPUs versus good yet silent cooling. In this review we'll look at the product, the architecture, the benchmarks, including frametime based FCAT measurements. Head on over towards our AMD Radeon HD 7990.
Club3D Radeon HD 7870 Joker review
We test and review the Club3D Radeon HD 7870 Joker, this is the much discussed 7870 card that in fact has a 7900 series GPU, the Tahiti LE. For a fair amount of money this series 7800 product now offers 7900 series performance. Armed with 2GB of graphics memory it hits a sweet spot gaming performance wise and to date it one of the more popular products in the mainstream segment. Let's check out the Club3D Radeon HD 7870 Joker.
