Multi-GPU gaming explained -- Both NVIDIA's SLI and AMD ATI's Crossfire allow you to combine/add a second, third or even fourth similar generation graphics card (or in more GPUs) to the one you already have in your PC. This way you effectively try to double, triple or even quadruple your raw rendering gaming performance.
Think of a farmer with a plough and one horse. One horse will get the job done yet by adding a second or maybe even four horses, you'll plough through that farmland much quicker and (hopefully) more efficiently. As weird as that analogy sounds, that's roughly the same idea for graphics cards. One card can do the job sufficiently, but with two or more you can achieve much more.
So along these lines, you could for example place two or more ATI graphics cards into a compatible mainboard, or two or more NVIDIA GeForce graphics cards in SLI mode.
A Crossfire compatible mainboard is pretty much ANY mainboard with multiple PCIe x8 / x16 slots.
A SLI certified motherboard is an nForce motherboard with more than two PCIe xc16 slots or a certified X58 or P55 motherboard. If your motherboard does not have the SLI certification mentioned on the box, it's not SLI compatible. Keep that in mind.
Once we seat the similar graphics cards in the carefully selected motherboard we just bridge them together, with a supplied CrossfireX connector or in NVIDIA's case, a SLI connector. Then install/update drivers, after which most games can take advantage of the extra horsepower we just added into the system.
Multi GPU rendering -- the idea is not new at all... if you are familiar with the hardware developments over the past couple of years you'll remember that 3dfx had a very familiar concept with the Voodoo 2 graphics cards series. There are multiple ways to manage two cards rendering one frame; think of Supertiling, it's a popular form of rendering. Alternate Frame Rendering, each card will render a frame (even/uneven) or Split Frame Rendering, simply one GPU renders the upper or the lower part of the frame. So you see there are many methods where two or more GPUs can be utilized to bring you a substantial gain in performance.
We'll be testing on an eVGA X58 motherboard today, this in fact is the eVGA X58 Classified 4-way SLI -- yes the one with the gazillion PCIe slots. Upper photo- here three cards installed.
The motherboard has two NF200 controllers allowing x16 PCIe bandwidth on all used slots up-to four cards. We use an unlocked engineering sample Core i7 965 processor and overclock it to 3.75 GHz.
The advantage of a somewhat mainstream graphics card is that you'll only have one 6-pin power connector per card -- obviously you'll need three or four of them depending on what you are installing.
In the above photo we added a fourth card in quad-Crossfire setup, you'll need three Crossfire bridges, each card has one included.
PowerColor Radeon RX 470 RED Devil 4GB review AMD releases it's second ASIC based on Polaris 10, the Radeon RX 470 with 4GB graphics memory is bound to impress for the money. Join us in this article where we'll tell you all about its performanc...
PowerColor Radeon RX 480 RED DEVIL review Join us as we review the PowerColor Radeon RX 480 RED DEVIL, we test the model fitted with 8GB graphics memory. This dark spawn from PowerColor is a mainstream graphics card series that will allow you...
PowerColor Devil HDX Sound Card Review Today on the slab is a new sound card from PowerColor, who need no introduction from their line of video cards, and it’s a beast, meet the PowerColor Devil HDX Sound Card....
PowerColor PCS Radeon R9 380X MYST review In this review we look at the the new PowerColor PCS Radeon R9 380X MYST 4GB. This graphics card is rendering your games even in the WHQD 2560x1440 range. And all that at a very reasonable price as w...