There's plenty of Ampage to go around, impressive is the 12V rails (AxV=W) rated at 83 Amp x 12 Volt = 996 Watt available just on that single rail.
The PSU is partly modular, all native connections like ATX power supply and CPU PEGs are mounted at default. You can hook up to six (!) PCIe Graphics connectors in a 6/8 configuration, we'll have a closer look at all the cables and connectors on the next page though.
There is one top fan supplied by Hong Hua; it is temperature and load controlled 140mm double ball-bearing fan with Red LED. The PSU has an ATX design and it'll fit in any regular chassis though, its dimensions are: 5.9"(W) x 3.4"(H) X 7"(L); 150mm(W) x 86mm(H) x 180mm(L). That makes length only "slightly" longer than usual.
When it comes to wiring we feel that there's enough connectors for this model, have a look at the supplied connectors, all with decent length by the way.
The ATX motherboard connector as well reached to 55CM, the Molex and SATA power cables 50 to 90 CM, the 8-pin CPU ATX power connector is roughly 60~65 cm and the PCIE graphics connectors reach a lovely 75 cm as well, nice.
OCZ Fatal1ty 750W PSU review We review the OCZ Fatal1ty 750W PSU. The power supply became available market a little ago and it one of the more popular models from OCZ. It offers Bronze efficiency, a single 12V rail. The PSU itsel...
OCZ Fatal1ty 1000 Watt PSU review We review the OCZ Fatal1ty 1000W PSU. The power supply became available market a little ago and it one of the more popular models from OCZ. It offers Bronze efficiency, a single 12V rail. The PSU itse...