As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
The Radeon HD 7870
Core Clock: 860 MHz
Core Clock: 950 MHz
Core Clock: 1200 MHz
Shader Clock: 860 MHz
Shader Clock: 950 MHz
Shader Clock: 1200 MHz
Memory Clock: 4800 MHz
Memory Clock: 4800 MHz
Memory Clock: 5420 MHz
For the MSI R7850 Power Edition we open up AfterBurner and free the card up from TDP restrictions first, so all the way up moves the Power Control settings slider towards 20%.
Overclocking wise the card will allow itself to be clocked to roughly 1200 MHz on the core and that's with a tiny bit of voltage tweaking (1.2V on the GPU). Memory can be boosted as well, just max it out at 5800 MHz.
Our card's AMD restriction was locked at 1050 MHz, so we had to use the unofficial overclocking trick to unlock the card to be able to pass 1050 MHz.
The 1200Mv voltage increase is probably the maximum you want to go. Don't overdo it with GPU voltage tweaking. With voltage tweaking we increase fan RPM manually to 50%, which results into a very acceptable noise level. Temps have risen to roughly 65~70 Degrees C due to the overclock and voltage tweaking.
Below, are some numbers based on the overclock:
Above, Crysis 2, same maxed out image quality settings as before yet now with added overclock results:
High Resolution Texture Pack
Ultra Quality settings
Level - Times Square (2 minute custom time demo)
Above, 3DMark 11 - the Performance test and score. As you can see, there is an additional bump in this very GPU limited software, lovely.
Above, Alien versus Predator, at 1920x1200 with 4x AA and 16X Anisotropic Filtering.
MSI Radeon R9-290X Lightning review This review will cover the MSI Radeon R9-290X Lightning, this graphics card is considered the beast that rules them all. With a PCB redesigned from ground up and usage of only the best components ..
MSI Radeon R9-290X Gaming OC review We review the MSI Radeon R9-290X Gaming OC. The cards equipped with that Hawaii GPU now is proper cooled thanks to the TwinFrozr cooler and steadily running and purring at just over 70 Degrees C, that...
MSI Radeon R9-270X HAWK review In this review we take a peek at the Radeon MSI Radeon R9-270X HAWK. Armed with a customized PCB and their TwinFrozr model IV based coolers they factory overclocked the product.
MSI Radeon R9-280X TwinFrozr Gaming OC review In this review we take a peek at the MSI Radeon R9-280X TwinFrozr Gaming OC review. The smexy dark custom PCB has been armed with quality components, a dual-BIOS and their dual fan based TwiNFrozr series edition coolers. MSI factory overclocked the product and will try to get you as much value for money as they can.