MSI GeForce GTX 660 Ti Power Editon OC review
Posted by Hilbert Hagedoorn on: 08/15/2012 01:00 PM [ 0 comment(s) ]
Overclocking the graphics card
As most of you know, with most video cards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need?
One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
|Reference product||This sample||Overclocked|
|Core Clock: 915 MHz||Core Core Clock: 1020 MHz||Core Clock: +125 MHz|
|Boost Clock: 980 MHz||Boost Clock: 1098 MHz||Boost Clock: ~1313 MHz|
|Memory Clock: 6008 MHz||Memory Clock: 6008 MHz||Memory Clock: 6958 MHz|
Now with the Dynamic boost function of the series 600 cards overclocking is definitely more complicated to work with. It remains simple enough though if you know what and how to do it.
In MSI AfterBurner you widen up the TDP limitations a bit, set the power limiter towards 114%. That way the Dynamic boost function won't down clock all the time to meet its upper threshold in TDP limitations.
We now add another 125 MHz towards the graphics core (that was the maximum stable on the of the factory-overclock) and increase Voltage with a +100 Mv. We now are hovering at just above 1300 MHz (which varies based on power draw/load/changes) on the overclock.
For the memory we ended at +475 MHz which is almost 7000 MHz (effective data rate). At this stage the cooler RPM was set at default which kept the noise levels under control at 40~41 DBa.
We now have some extra performance at our hands on top of the factory overclock, have a peek at the results when overclocked.
Above, Crysis 2, same maxed out image quality settings as before yet now with added overclock results:
- DirectX 11
- High Resolution Texture Pack
- Ultra Quality settings
- 4x AA
- Level - Times Square (2 minute custom time demo)
Above, 3DMark 11 - the Performance test and score. As you can see, there is an additional bump in this very GPU limited software, lovely. Also compare it with a reference GTX 680 results. Mind you that GTX 670 and GTX 680 overclock as well, so try to keep things in perspective.
Above, Alien versus Predator, in 1920x1200 at 4xAA and 16X anisotropic filtering
In this article we review the MSI GeForce GTX 650 Ti BOOST OC edition review with that OC for a factory tweak. The product is customized with a new PCB, cooling and a few tweaks, it has 2GB of memory with both that memory and the core base-clock slightly overclocked. Overall an interesting product at an interesting price in the lower segment of the mainstream market.
MSI GeForce GTX 660 HAWK review
MSI GeForce GTX 660 HAWK we test and review the graphics card also located under SKU N660 HAWK.
MSI GeForce GTX 650 Ti review
We review the MSI GeForce GTX 650 Ti Power Edition. MSI applies a custom PCB and their Cyclone II cooler. Next to that you receive a factory overclock right out of the box. Let's check it out shall we ?
MSI GeForce GTX 660 TwinFrozr III review
We review the MSI GeForce GTX 660 TwinFrozr III. it's already factory overclocked for you, comes in a custom design PCB out and is custom cooled. Combined with MSI's Military component usage you may expect something sturdy and well performing. lets check out this review.