Inno3D GeForce 8800 GT iChill edition review - 6 - Hardware and Software Used (testsuite)

by Hilbert Hagedoorn on: 04/10/2008 02:00 PM [ 0 comment(s) ]

Hardware and Software Used

Now we begin the benchmark portion of this article, but first let me show you our test system plus the software we used.

Mainboard

nVIDIA nForce 680i SLI (eVGA)

Processor

Core 2 Duo X6800 Extreme (Conroe)

Graphics Cards

Various GeForce Series 8 & 9 cards

Memory

2048 MB (2x1024MB) DDR2 CAS4 @ 1142 MHz Dominator Corsair

Power Supply Unit

Enermax Galaxy 1000 Watt (new DXX PCIe 2.0 model)

Monitor

Dell 3007WFP - up-to 2560x1600

OS related Software

Windows Vista
DirectX 9/10 End User Runtime
NVIDIA ForceWare 174.53
NVIDIA nForce 680i platform driver 9.53

Software benchmark suite

Frontlines: Fuel of War
Call of Duty 4
Crysis
World in Conflict
Ghost Recon: Advanced Warrior 2
S.T.A.L.K.E.R.
F.E.A.R.
3DMark06

A word about "FPS"

What are we looking for in gaming performance wise? First off, obviously Guru3D tends to think that all games should be played at the best image quality (IQ) possible. There's a dilemma though, IQ often interferes with the performance of a graphics card. We measure this in FPS, the number of frames a graphics card can render per second, the higher it is the more fluently your game will display itself.

A game's frames per second (FPS) is a measured average of a series of tests. That test often is a time demo, a recorded part of the game which is a 1:1 representation of the actual game and its gameplay experience. After forcing the same image quality settings; this timedemo is then used for all graphics cards so that the actual measuring is as objective as can be.

Frames per second	Gameplay
<30 FPS	very limited gameplay
30-40 FPS	average yet very playable
40-60 FPS	good gameplay
>60 FPS	best possible gameplay

So if a graphics card barely manages less than 30 FPS, then the game is not very playable, we want to avoid that at all cost.
With 30 FPS up-to roughly 40 FPS you'll be very able to play the game with perhaps a tiny stutter at certain graphically intensive parts. Overall a very enjoyable experience. Match the best possible resolution to this result and you'll have the best possible rendering quality versus resolution, hey you want both of them to be as high as possible.
When a graphics card is doing 60 FPS on average or higher then you can rest assured that the game will likely play extremely smoothly at every point in the game, turn on every possible in-game IQ setting.
Over 100 FPS? You have either a MONSTER of graphics card or a very old game.

13 pages « < 5 6 7 8 next »

Inno3D GeForce GTX 770 iChill HerculeZ X3 Ultra review
In this article we review the beast, the GTX 770 HerculeZ X3 Ultra from Inno3D is locked and loaded with the mighty HerculeZ X3 cooler, that's three slots wide but keeping the GPU under 55 Degrees C and completely silent. Pure awesomeness. That's not all though, it is factory overclocked for you at a very high level but even so can be tweaked quite a bit further.

Inno3D GeForce GTX 760 iChill review
In this article we review the Inno3D GeForce GTX 760 iChill edition, this particular model comes with a three-slot HerleZ cooing solution.

Inno3D GeForce GTX 660 Ti iChill review
In this review we'll look at the GeForce GTX 660 Ti from Inno3D, it's their all new GeForce GTX 660 Ti iCHILL version and to date is one of the most impressive graphics cards in the 660 Ti range we have tested.

Inno3D GeForce GTX 580 OC review
We review the Inno3D GeForce GTX 580OC. Despite a very high price tag the product seems to become a nice success. As such directly at launch several models based of this SKU where already announced, e.g. the regular clocked models, factory higher clocked models, liquid cooled models. This OC edition, in particular this is a reference GeForce GTX 580 that has been clocked faster to 820 MHz on the core where it also welcomes a nice bump on the overall memory frequency.