Inno3D GeForce 8800 GT iChill edition review -
12 - Overclocking & Tweaking
Overclocking & Tweaking
As most of you with most videocards know, you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simple, tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need?
One of the best tool for overclocking NVIDIA and ATI videocards is our own Rivatuner that you can download here. If you own an ATI or NVIDIA graphics card then the manufacturer actually has very nice built in options for you that can be found in the display driver properties.
Where should we go ?
Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners not to increase the frequency any higher then 5% of the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today tested cards anyway, but we'll still show it ;)
All in all... do it at your own risk.
- Any generic 8800 GT at standard is at 600 / 1512/ 1800 clocks (core / shaders / memory).
- We overclocked it (easily) towards 758 / 1624 / 2110 (core / shaders / memory).
That actually is a pretty nice overclock on top of the default higher clock.
As you can see, the result is a notably faster performing card. The game you are looking at is Frontlines: Fuel of War with maximum in-game quality settings enabled.
Image Quality setting:
- 4x Anti Aliasing
- 16x anisotropic filtering
- All settings maxed out
Bare in mind though, overclocking results into slightly more heat build-up in the GPU as well. Heavily stressed the core temperature rose towards ~65 degrees C. The card can easily cope with it though.
In this article we review the beast, the GTX 770 HerculeZ X3 Ultra from Inno3D is locked and loaded with the mighty HerculeZ X3 cooler, that's three slots wide but keeping the GPU under 55 Degrees C and completely silent. Pure awesomeness. That's not all though, it is factory overclocked for you at a very high level but even so can be tweaked quite a bit further.
Inno3D GeForce GTX 760 iChill review
In this article we review the Inno3D GeForce GTX 760 iChill edition, this particular model comes with a three-slot HerleZ cooing solution.
Inno3D GeForce GTX 660 Ti iChill review
In this review we'll look at the GeForce GTX 660 Ti from Inno3D, it's their all new GeForce GTX 660 Ti iCHILL version and to date is one of the most impressive graphics cards in the 660 Ti range we have tested.
Inno3D GeForce GTX 580 OC review
We review the Inno3D GeForce GTX 580OC. Despite a very high price tag the product seems to become a nice success. As such directly at launch several models based of this SKU where already announced, e.g. the regular clocked models, factory higher clocked models, liquid cooled models. This OC edition, in particular this is a reference GeForce GTX 580 that has been clocked faster to 820 MHz on the core where it also welcomes a nice bump on the overall memory frequency.