HIS Radeon HD 7950 review
Posted by Hilbert Hagedoorn on: 01/30/2012 02:00 PM [ 0 comment(s) ]
Specs and Southern Islands
Southern Islands
As weird as it might sound, we are going to talk about some islands first. You've been hearing about several codenames and that can be a little confusing. AMD codenamed their 6000 and 7000 product series after Islands in the northern (6000) and southern (7000) hemisphere.
It's simple really, in the market we have entry level, mainstream and high-end products. When you notice "Verde" that's entry level. Pitcairn will be the codename the mainstream products will hide under, and finally Tahiti is the codename for the most high-end products.
- Entry level = Verde = Radeon HD 7700 series
- Mainstream level = Pitcairn = Radeon HD 7800 series
- High-end level = Tahiti = Radeon HD 7900 series
The entire segment from top to bottom will be released in Q1 2012, today the second product series, the Radeon HD 7950.
Technology
We'll focus on the 7900 series today of course, but it is important to understand that there are significant changes in this Family of GPUs. The GPU architecture was overhauled, AMD moved towards a 28nm process technology, the new cards are PCIe gen 3 compatible and there have been significant changes on power consumption. We'll address all the features separately of course.
With the launch of the Radeon HD 7000 series you will also see Eyefinity updated towards version 2.0. DDM audio is now fully supported (you hear audio on the actual monitor when it's played off), a new 5x1 landscape mode is introduced, and you may now create custom multi-monitor resolutions. But let's break things down.
Radeon HD 7950
AMD now bakes GPU's on the all new 28nm node, in very simple wording that means they can put more transistors on a smaller area. The Tahiti core has a stunning 4.3 Billion transistors, 4,312,711,873 to be precise.
The internal architecture has changed, we'll talk a little deeper about that in a minute. But as a result, the R7950 is packed with 1792 shader processors harbored in Compute Units segments (28 of them).
Memory volume wise the rumors were right, the card will pack a whopping 3 Gigabyte of DDR5 memory. This is not done for bragging rights, but AMD simply takes Eyefinity and multiple monitor usage very seriously; it is there where the extra memory makes a lot of sense. The memory bus has been increased from 256-bit towards 384-bit as well.
Packing so many transistors on a product is staggering, but if you can't apply a fast enough clock frequency it would become a problem. Well, that's not an issue for AMD either, the R7950 is clocked at 800 MHz with room to tweak towards over a full GHz. That 384-bit memory is clocked at impressive speeds as well, 5 Gbps that's bandwidth up-to 240 GB/sec (!).

We test and review the a HIS Radeon HD 7950 HIS IceQ X, this 30 CM sized beast is one heck of a graphics card. Custom PCB, custom cooling, it's low noise and being a Boost edition card series, it clocks in at 950 MHz.
HIS Radeon HD 7850 4GB iPower IceQ Turbo review
We test and review the a HIS Radeon HD 7850 iPower IceQ Turbo as single card and in Crossfire today. The HIS Radeon HD 7850 iPower IceQ Turbo is a factory overclocked 4GB version of the Radeon HD 7850 graphics card.
HIS Radeon HD 7970 X Turbo edition review
We review the HIS Radeon HD 7970 X Turbo edition. With this card they took the new Tahiti XT2 and redesigned the R7970 board from ground up. though very long the end result is a 31cm PCB with mane power phases and optimizations. Fun to see are the voltage and FAN monitor LED options. Most impressive however is the sheer amount of monitor connectors HIS injected into this product, four DisplayPort connectors, one HDMI and a DVI connector. If needed you can go for Eyefinity6. Oh did I mention already that the factory set boost clock frequency is 1180 Mhz ?
HIS Radeon HD 7950 ICEQ Turbo review
We review the HIS Radeon HD 7950 IceQX Turbo. The product comes factory overclocked very nicely for you as it is running a gentle 900 MHz clock frequency. HIS uses a custom PCB and dual-slot cooler making the card very easy to install. Despite that factory overclock and that cooler the noise levels remain at very low levels whereas the GPU temperatures remain downright excellent as we'll show you in this review.
