As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
Core Clock: 830MHz
Core Clock: 880MHz
Core Clock: 955MHz
Shader Clock: 830MHz
Shader Clock: 955MHz
Memory Clock: 5000MHz
Memory Clock: 5600 MHz
Now we had a bit of an issue with 3rd party overclocking, so we opted to use the internal OverDrive function in the AMD drivers. AMD gives a lot of tweakability in terms of MHz versus sliders.
We are not overclocking the CrossfireX configuration by the way. I was seriously concerned about the PSU load.
Now there is a little room left for overclocking, but you need to wonder ... why you should do it. The card already runs pretty hot and noisy -- the performance however is already beastly. You can imagine that overclocking won't help you out a lot at this perf level.
Regardless of that, with Overdrive make sure you do the following:
Enable AMD Overdrive
Increase power control settings to +20%
Adjust FAN RPM as required
Find your preferable overclock
MAKE SURE you do the above with each of the two GPUs. See the blue colored pull down in the screenshot, you need to apply the settings for each GPU.
We left the fan RPM control at default in all circumstances. We reached a very decent overclock showing a decent increase in overall performance. Voltage tweaking is not yet option. Our stable end result was 955 MHz on the core and 5600 MHz on the memory. Here as well the temps did not change very much, DBa levels remain roughly similar but noisy. For overclocking, as stated, we set PowerTune to it's maximum +20 value.
Above we have Battlefield Bad Company 2, maxed out image quality settings as before with 8xAA 16xAF
Above we have Metro, maxed out image quality settings as before with AAA mode and 16xAF.
Above we can see 3DMark 11 - the Performance mode is applied here. Alright, enough benchmarks we say, let's head onwards to the conclusion.
HIS Radeon R9-290X Hybrid ICEQ review In this review we will benchmark and test HIS Radeon R9-290X Hybrid ICEQ edition. The card uses liquid cooling for the GPU that runs towards a 120mm radiator. On the card itself there still is a sma...
HIS Radeon R7-260X iCooler review Today we'll review the AMD Radeon R7-260X, a brother of the 260. The Radeon R7 260X is fitted with a Curacao XT core which has cut down specifications with a total of 896 Stream processors, a compu...
HIS Radeon R9-280 IceQ X2 OC review In this review we look at the Radeon R9-280 IceQ X2 OC review from HIS. R9-280 You read that right, anyone remember the Radeon HD 7950 ? Armed with a customized PCB and their top model IceQ coolers ...
HIS Radeon R9-290X review In this review we test the HIS Radeon R9-290X. The product is based on the reference design of the original Radeon R9-290X. These cards are little beasts. As such this in-depth review will cover the V...