As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own Rivatuner. If you own an ATI or NVIDIA graphics card then the manufacturer actually has some very nice built in options for you that can be found in the display driver properties. Based on Rivatuner you can alternatively use MSI AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
Core Clock: 775 MHz
Core Clock: 775 MHz
Core Clock: 903 MHz
Shader Clock: 775 MHz
Shader Clock:775 MHz
Shader Clock: 903 MHz
Memory Clock: 4000 MHz
Memory Clock:4000 MHz
Memory Clock: 4740 MHz
Now, we left the fan RPM control at default in all circumstances. We reached a very decent overclock guaranteeing better results. Slightly better than reference, and memory definitely clocked a notch better as well.
Voltage tweaking is not yet an option. With AfterBurner (download here) our stable end result was roughly 900 MHz on the core and 4740 MHz on the memory.
Here we have the card with Call of Duty: Modern Warfare 2, maxed out image quality settings as before with 4xAA 16xAF, keep in mind that the light blue bar represents baseline 6850 performance and the bright orange one the overclocked performance. It's another 10 to 15% performance totally for free.
But let's have a look at the HIS R6870, next page please.
HIS Radeon R7-260X iCooler review Today we'll review the AMD Radeon R7-260X, a brother of the 260. The Radeon R7 260X is fitted with a Curacao XT core which has cut down specifications with a total of 896 Stream processors, a compu...
HIS Radeon R9-280 IceQ X2 OC review In this review we look at the Radeon R9-280 IceQ X2 OC review from HIS. R9-280 You read that right, anyone remember the Radeon HD 7950 ? Armed with a customized PCB and their top model IceQ coolers ...
HIS Radeon R9-290X review In this review we test the HIS Radeon R9-290X. The product is based on the reference design of the original Radeon R9-290X. These cards are little beasts. As such this in-depth review will cover the V...
HIS Radeon R9-280X IceQ X2 Turbo review In this review we look at the Radeon R9-280X IceQ X2 Turbo review from HIS. Armed with a customized PCB and their top model IceQ coolers they factory overclocked the product and will try to get you as much value for money as they can. Follow us into this review where we'll look at temperatures, noise, performance, Frame latency and we'll even give Ultra High Definition gaming a go with the hottest game titles on the globe.