11. Did you modify anything ? cases/video cards/other? Did you do it yourself? Walk us through it.
I put the whole thing together myself. It was even my idea to use the U bolts to hold the cube radiator down on the top of the case. I custom fit and filled the whole system with a spare power supply I had. Just trip the Power OK and a ground wire to turn it on hee hee. All case holes were drilled out with a cordless drill and then the use of tin snips. Yes it was hard. For the video card, I cut a small notch out of the stock plastic shroud to get the water tubing / block to fit. It was only a 30 dollar water block but it works extremely well. The GPU never goes past 55 degrees C under Furmark. I would get close to 85 degrees C with the stock cooler. It also drops my room temp in the summer time by a few degrees. I went with the water cooling to get the huge amounts of heat out of the case when it is warmer outside.
12. Your 3DMark06 / 3DMark Vantage score (P+GPU)
Ill have to get back to you guys on that.
13. Do you have any Future updates planned ?
I cant wait to start seeing the 8 core AMD AM3+ chips in stores. I hear that chip has about 50 percent over what my X6 can do. Its either that or Im getting a new case. I really like the Corsair 800D
Congratulations to this months winner. You will be contacted through email regarding address information. The OCZ Z Series 1000W Modular PSU will be shipped to you worldwide for free, courtesy of OCZ.
New -- Check out a full photo gallery of this months winner right here.
Guru3D Rig of the Month - March 2014 The Guru3D Rig of the Month March 2014 was made by Douglas Alves Vieira, he designed a PC that has a movie theme. Welcome to the Umbrella corporation. Yeahs these words should sound familiar as the ch...
Guru3D Rig of the Month - February 2014 The Guru3D Rig of the Month February 2014 was made by Amlett, he designed a PC that is not extremely modded, but very stylish, simple and subtle. Yeahs these keywords would suit his rig called the Ome...
Guru3D Rig of the Month - January 2014 The Guru3D Rig of the Month January 2014 was made by Luciel Campbell, in the past he already won a prize and that drove him towards his latest creation, called APASF. He has made a LAN box beyond be...
Guru3D Rig of the Month - December 2013 The Guru3D Rig of the Month December 2013 was made by Jeroen Timmermans aka Timmy and he has made something maybe a little weird to look at really. But weird is good, as that is something unusual and his rig called "The Cuprum Tower" definitely fits the description and makes for an awesome Rig of the Month here at Guru3D.com