Paired with the new Ivy bridge processors come new motherboard chipsets, eleven in total of which six are intended for desktop processors, namely the H77, Z75, Z77, B758, Q75 and Q77.
For end consumers like you and me the H77 chipset will be less performance targeted and comes with support for monitor connectivity. The Z77 chipset is targeted at performance and enthusiast end users allowing much more tweaking and providing performance features.
Important note: most Series 6 motherboards will support Ivy bridge processors! All you need is a BIOS update with support from your motherboard manufacturer. Obviously features like PCIe Gen 3 and native USB support will not kick in.
Below you can see a block table with the differences in chipset and thus motherboards.
In-between say a Z68 and Z77 chipset only a few things have changed. Native USB 3.0 support is to be found at the Z77 chipset, and then PCEI Gen 3 graphics slots.
The new Z77 series chipsets will come with the same amount of SATA2 and 3 controllers as P67/Z68. That means you get four SATA2 ports and another two SATA3 ports native from the Z77 PCH chip.
With PCIe Gen 3 SLI and Crossfire with supported cards should run quite well on them.
More PCIe lanes
The one thing that people grumble about the most with P67/Z68 is the relatively small number of available PCIe lanes (16) for graphics cards. That's fixed on Z77 with PCIe Gen 3.0. Ivy Bridge processors feature 16 PCIe 3.0 lanes to be used for graphics and/or other add-in PCI cards. All consumer chipsets support a single PCIe x16 device, while the two Z7x chipsets add the option to use two devices at x8. On Z77 boards there is also the option of using one device at x8 and two more devices at x4 speeds. So you get a full 3.0 x16 lane or two 3.0 x8 lanes. Remember, a x8 lane is in fact a PCIe gen 2.0 x16 lane. You can also split them in x8 and two x4 gen 3.0 lanes.
So if you are using a setup with two or more graphics cards (SLI/Crossfire), the PCIe bandwidth is more then plentiful.
PCIe gen 3.0
The inclusion of PCI Express Gen 3 is great, but what does that boil down to? Well simply put, PCI Express Gen 3 provides a 2X faster transfer rate than the previous generation, this delivers capabilities for next generation extreme gaming solutions.
PCI Express Gen 3 has twice the available bandwidth, 32GB/s, improved efficiency and compatibility and as such it will offer better performance for current and next gen PCI Express cards. Going from PCIe Gen 2 to Gen 3 doubles the bandwidth available to the add-on cards installed, from 500MB/s per lane to 1GB/s per lane.
So a Gen 3 PCI Express x16 slot is capable of offering 16GB/s (or 128Gbit/s) of bandwidth in each direction. That results in 32GB/sec bi-directional bandwidth. Obviously your hardware used needs to be compatible.
LGA 1155 - Socket Compatibility
With Sandy Bridge we moved to socket LGA 1155 and for Ivy Bridge we remain with that socket. That's good news as we can use the processor on the series 6 chipset as well as the new series 7 chipset.
We stated this already, but chances are pretty good that your (say) Z68 motherboard will get a BIOS update, making Ivy Bridge processors run 100% on your motherboard. That's good news if you like to save some money. Be aware though though that you would lose PCIe Gen 3 and native USB 3.0 connectivity. However chances are pretty good that you do not need PCie Gen 3.0 just yet and that your motherboard supports USB 3.0 by way of a 3rd party controller. Then you are set to go..
There's another advantage of the socket compatibility, you do not need to purchase a new CPU cooler.
it should be abundantly clear by now but USB 3.0 is finally supported at chipset level by Intel. Which should save motherboard vendors money when building Intel chipsets and hopefully make the boards overall less complicated to design. In addition to that, we will hopefully see better USB 3.0 performance. The chipset will host 4 USB 3.0 ports. Next to that 10 USB 2.0 ports are supported from the PCH.
Gigabyte GeForce GTX 750 Ti WindForce review In this review we take the Gigabyte GeForce GTX 750 Ti WindForce for a spin. The card is obviously based on NVIDIAs MAxwell based GTX 750 Ti GPU. Gigabyte designed their own PCB, tweaked the card a h...
Gigabyte Radeon R9-290X WindForce 3X OC review We review the Gigabyte Radeon R9-290X WindForce 3X OC edition. A lot of you guys have been waiting on a custom cooled version of this product. Armed with the latest revision of the WindForce 3X cooler and will get that 2816 Stream processor ...
Gigabyte Uranium game mouse review We review the Gigabyte Uranium game mouse, the device is unique in the sense that is comes with an OLED display POD that will inform you of your mouse polling rate, DPI or even battery status. The hig...
Gigabyte G1.Sniper B5 review Let's review the Gigabyte G1.Sniper B5, which is based on the budet B85 chipset from Intel. See B85 based motherboards typically end up in business desktops and normally are limited from overclocking. Well, that changes with the Gigabyte G1.Sniper B5 ! So small price, nice features and tweakability ? We just have to check that out. Oh and you'll get many USB 3.0 ports and of course an improved and enhanced audio solution (albeit that really is a software layer sitting on top of the Realtek ALC 898 codec). Be sure to check out this review.